NEC 60XP10 Power ON/STANDBY Switches the power on/standby, Rgb, Menu, 16 SET, 17 , +, Exit, Zoom

Part Names and Functions - continued

	POWER ON					STANDBY
1
2						PICTURE
3			RGB	DVD/HD VIDEO MEMORY
4
	PICTURE
		MODE			SIZE

5

6

1 2 3

4 5 6

7

7 8 9

0

DISPLAYMENU

8 15

9						16
				SET	+
						17
	AUTO
					EXIT
	SET UP
10						18
11		VOL			ZOOM	19
	+			POINTER	+
12
				MUTE		20
		SPLIT SCREEN
13		PIP		S BY S	SINGLE
		SWAP	SELECT/FREEZE CAPTURE
		REMOTE ID
14		SET	RESET		SLEEP	21

REMOTE CONTROLLER RU-M113

Remote Control Functions

7) KEYPAD

Set REMOTE ID.

8) DISPLAY

Turn on/off the Information OSD.

9)

Move selection up or down

10) AUTO SETUP

Adjusts the CLOCK PHASE, CLOCK, and POSITION settings automatically. (Analog RGB signal input only)

11) POINTER

Turn on/off the pointer.

12) VOLUME

Increases/Decreases sound level.

13) SPLIT SCREEN

PIP: Picture-in-Picture mode.

S BY S: Side-by-side mode.

SINGLE: Returns to normal mode.

SWAP: Swaps the Split Screen images.

When the QUICK SWAP function (see OSD OPTION4) is ON, SWAP can be used to change signal input. (Single screen mode)

SELECT/FREEZE: Selects which input is active when in split screen mode.

When the PIC FREEZE function (see OSD Option4) is operating, SELECT/FREEZE can be used to display still pictures on the sub screen.

1)POWER ON/STANDBY Switches the power on/standby.

*If the Power Indicator on the display is not glowing, then no controls will work.

2)VIDEO

Switches the input signal to the VIDEO source.

3) RGB

Switches the input signal to the RGB source.

4) DVD/HD

Switches the input signal to the DVD/HD source.

5) PICTURE MODE

Selects Picture Mode: [STANDARD], [BRIGHT], [CINEMA1], [CINEMA2], [DEFAULT].

STANDARD: for viewing in a bright room

BRIGHT: brighter picture than STANDARD

CINEMA1, 2: for viewing in a dark room, good for movies

DEFAULT: factory default settings

6) SIZE

Set the aspect ratio of the image.

CAPTURE : Captures still picture.

14) REMOTE ID

Activates REMOTE ID function.

15) MENU

Turns ON/OFF menu mode.

16) SET

Makes selection.

17) - , +

Increases or decreases amount of adjustment.

18) EXIT

Goes to the previous menu.

19) ZOOM

Enlarges or reduces the picture.

20) MUTE

Mutes audio output.

21)SLEEP Sleep timer.

NOTE: Any buttons without a corresponding explanation will not work with the Plasmasync display.

English-11

Downloaded From TV-Manual.com Manuals