Arcam AVR200 Connecting outputs, Connecting to other equipment, Connecting to a power supply

Page 7

Connecting outputs

Connecting to other equipment

MONITOR OUT

Both composite and S-video monitor outputs are provided for connection to the ‘Video line in’ of your TV, monitor, or projector. If you have both Composite and S-video inputs connected to your AVR200 you need only connect the S-VIDEOMonitor Output to your TV (provided that your TV accepts an S-video input).

LOUDSPEAKER OUTPUTS

Before connecting loudspeakers to your AVR200 you must set the Impedance switch on the rear to the correct position.

WARNING: Never adjust this switch with the power on or you will damage the AVR200.

If your loudspeakers are rated at 6Ω or lower set the switch to the 4–6Ωposition. If your loudspeakers are rated higher than 6Ω , set the switch to the 8Ω position.

WARNING: This unit should only be used with loudspeakers with an impedance rating between 4Ω and 8Ω .

WARNING: When connecting loudspeakers, ensure that no stray strands of wire are allowed to touch other cables or the AVR200’s casing as this can cause a short circuit and damage the amplifier.

Connecting to a power supply

Wrong plug?

Check that the plug supplied with the unit fits your supply and that your mains supply voltage agrees with the voltage setting (120V or 230V) indicated on the rear panel of the unit.

If your mains supply voltage or mains plug is different, consult your Arcam dealer or Arcam Customer Support on +44 (0)1223 203203.

Mains lead

The appliance is normally supplied with a moulded mains plug already fitted to the lead. If for any reason the plug needs to be removed, it must be disposed of immediately and securely, as it is a potential shock hazard when inserted into the mains socket. Should you require a new mains lead, contact your Arcam dealer.

Plugging in

Push the plug (IEC line socket) of the power cable supplied with the unit into the socket (AC INLET) in the back of the unit. Make sure it is pushed in firmly.

Put the plug on the other end of the cable into your power supply socket and switch the socket on.

Non-use periods

If the unit is to be left unused for an extended period, we recommend that you switch the unit off from the front panel button, rather than use ‘stand by’ mode with the remote control.

English

Bi-wiring and Bi-amping loudspeakers

Notes on these techniques are given in the Reference section of this handbook.

Preamplifier outputs

If you wish to upgrade your system by adding a power amplifier, always specify an Arcam unit to ensure matching gain.

The AVR200 has six line-level pre-amp outputs that can be connected to Arcam external power amplifiers to bi-amplify (‘bi-amp’) any of the channels. Alternatively, the AVR200 can be used solely as a preamplifier.

Depending on how your system is configured, the subwoofer AUDIO PRE-OUTshould be connected using a line level interconnect, to either:

■an active subwoofer, or

■a power amplifier used to drive a passive subwoofer.

DIGITAL OUT

Use this socket to connect to the input of a suitable digital recorder (e.g. a CD-R or minidisc). When using a coaxial digital input, the signal is passed through the AVR200 with no changes. An optical input is restricted to a maximum frequency of 48kHz.

12V TRIGGER OUT

This connection is normally used only with multi-room installations. If you are bi-amping with a power amplifier and wish to power both units on or off simultaneoulsy, see page 15.

PHONES (Headphone output)

A 6.3mm stereo jack socket is provided on the front panel for headphone listening. Inserting the jack automatically mutes (i.e.

cuts off) the loudspeakers, and AUDIO PRE-OUToutputs. Surround

AVR200

mode settings are ignored: headphone output is in stereo.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Arcam AVR200 surround sound receiver Safety instructions Safety guidelinesSafety compliance Safety Using this handbookContents FM aerial InstallationSetting up the aerials Positioning the unitInterconnect cables Connecting inputsRemote Control Input Ground Lift switchConnecting to other equipment Connecting outputsConnecting to a power supply Display Effect Setting up Using the On Screen Display OSDSetup Input settingsChannel balance Channel delays6ft Difference Delay msDistance to listening position Your Recommended speaker settings for different systems Speaker settingsInput selection Using the AVR200 Front panel controlsPower Surround ModeBass and Treble controls Volume controlTape Monitor FM, AMUsing the tuner CR-340 Remote Control Using the remote controlBi-wiring your loudspeakers Reference Bi-wiring and bi-amping loudspeakersBefore you start Problem Cause TroubleshootingRadio Specification Amplifier SpecificationTechnical specifications On line registration Guarantee

AVR200 specifications

The Arcam AVR200 is a sophisticated audio-video receiver that is designed for home cinema enthusiasts who seek superior sound quality and advanced features. With its sleek design and high-performance capabilities, the AVR200 stands out as an impressive addition to any home theatre setup.

One of the main features of the AVR200 is its comprehensive support for various audio formats. It is equipped with the latest digital processing technologies, including Dolby Digital and DTS decoding, enabling it to deliver immersive surround sound for movies, music, and video games. With a total power output of 100 watts per channel, the AVR200 can drive a wide range of speakers, ensuring a rich and dynamic audio experience.

The Arcam AVR200 supports high-definition video formats and is equipped with multiple HDMI inputs, allowing users to connect several devices like Blu-ray players, gaming consoles, and streaming devices. It is compatible with 4K Ultra HD video pass-through, making it future-proof for upcoming high-resolution content. Additionally, the onboard video scaling technology upscales lower-resolution video to enhance image quality, providing a visually stunning experience.

Another significant characteristic of the AVR200 is its user-friendly interface. The receiver features an intuitive on-screen display that simplifies setup and operation. Users can easily navigate through the menus to select inputs, adjust settings, and customize audio preferences. The inclusion of a remote control further enhances convenience, allowing effortless management of the receiver’s functions from the comfort of a sofa.

Room acoustics can significantly impact audio performance, and the AVR200 incorporates advanced room calibration technology. This feature automatically analyzes the acoustics of the listening environment and adjusts speaker settings accordingly, ensuring optimized performance regardless of room shape or size. This adaptability is crucial for achieving the best sound experience in various home environments.

In terms of connectivity, the AVR200 boasts a variety of options, including coaxial and optical digital inputs, and analog audio connections. Additionally, it features a dedicated 12V trigger output to facilitate easy integration with other equipment, like cinema screens or projectors.

Overall, the Arcam AVR200 combines high-performance audio capabilities with user-friendly features and modern technology, making it an excellent choice for anyone looking to elevate their home theatre experience. With its emphasis on sound quality and video performance, the AVR200 remains a top contender in the competitive market of AV receivers.
Top Page Image Contents