Using the remote control, CR-340 Remote Control

Using the remote control

CR-340 Remote Control

The CR-340 remote control gives access to all functions available on the front panel, plus some additional functions only available from the remote. It also has controls to operate Arcam CD and DVD players.

	CD/DVD lights
	These indicate the function of the CD/DVD button at the bottom of
	the control. They are not related to any function on the AVR200.
	The LED only stays on for 15 seconds to conserve battery life. If
	neither LED is lit this does not mean that the remote control unit
	is not working!
Source selection buttons					Power/Standby
These operate in the same way as the source selection buttons			AV		Toggles the ampliﬁer between stand by mode and full power
on the front panel of your AVR200 ampliﬁer.	CD DVD				mode. The power indicator light next to the power button on the
					front panel is red when the ampliﬁer is in stand by and green
	SAT	DVD	VCR	AUX	when powered up.
	SAT	DVD	VCR	AUX
RDS INFO	TAPE	CD	FM	AM	P–/P+
RDS INFO					Cycles through preset radio stations, or scans through frequency,
Displays Radio Data System (RDS) text information, if available.
	INFO	T	P–	P+	depending on the Tuner mode setting.
Press again for station frequency, and again to show station	INFO		P–	P+	depending on the Tuner mode setting.

		MODE
information (the default mode).
5.1	5-1				TUNER MODE
5.1					TUNER MODE
Selects the multi-channel output from a DVD audio player or					Toggles between Preset mode and Tune mode. See ‘Using the
external decoder source connected to the 5.1 channel input.		SLEEP	TEST		tuner’	for details.
SLEEP					TEST
Switches the ampliﬁer into stand by mode after a preset number					TEST
					Engages the test signal generator so that the volume for each
of minutes. Pressing SLEEP once will set the sleep time to 90
					channel can be balanced from your listening position. The signal
minutes. ‘SLEEP MODE’ is shown on the display panel.			OK
minutes. ‘SLEEP MODE’ is shown on the display panel.					moves from Front Left to Centre, Front Right, Rear Right, Rear
Each consecutive press of SLEEP reduces the sleep time by
Each consecutive press of SLEEP reduces the sleep time by					Left and Subwoofer in a continuous cycle. Note that the test
30 minutes. Sleep mode is cancelled by setting the time to 0					signal may not be heard through a subwoofer.
minutes, or by pressing the POWER or STANDBY button.					See ‘Using the On Screen Display’ for full instructions on this

TRIM					feature.
TRIM					Cursor pad and OK button
Allows direct access to trim the centre, rear and subwoofer					Cursor pad and OK button
Allows direct access to trim the centre, rear and subwoofer					These are used to navigate through the pages in the on screen
speaker outputs. Press TRIM to cycle between channels and use
					display (OSD). See ‘Using the On Screen Display’.
the • and • arrows to adjust levels.	TRIM				display (OSD). See ‘Using the On Screen Display’.
the • and • arrows to adjust levels.
MODE		MODE
Scrolls through the available surround sound modes (Stereo,
Pro Logic II, etc.). The selection is shown in the display area		DYN			VOLUME and MUTE (		)
for three seconds.					Press + to increase volume or – to decrease the output volume
DYNAMIC RANGE					on the ampliﬁer.
DYNAMIC RANGE					Press	to mute the speaker connections and pre-amp outputs.
Compresses the dynamic range for low-level listening of Dolby	CD				Press	to mute the speaker connections and pre-amp outputs.
	CD				Both tape outputs and the headphone socket remain active. In
Digital sources. The dynamic range may be set from 100% (the	DVD
					mute mode the display ﬂashes ‘MUTING’.
default) to 25% (maximum compression) in steps of 25%. The					mute mode the display ﬂashes ‘MUTING’.
default) to 25% (maximum compression) in steps of 25%. The		ENTER
reduction is shown on the display.		ENTER			Mute is disabled either by pressing			again, or by adjusting the
reduction is shown on the display.					Mute is disabled either by pressing			again, or by adjusting the
	MODE				volume. Note that the volume and mute controls have no effect
	MODE				on the output levels of Arcam CD players.
					on the output levels of Arcam CD players.
		CD/DVD
CD/DVD functions
The CD/DVD button toggles the remote control unit into
controlling an Arcam CD or DVD player: this setting is brieﬂy
conﬁrmed by a light at the top of the controller.
		CR-340
NOTE: Remember to install the two AAA batteries
supplied before trying to use your remote control!

	Do not place anything in front of the display area on the
	AVR200 (where the IR receiver is located), or the remote	AVR200
	control may not work.	AVR200
	control may not work.

E n g l i s h

AVR200 specifications

The Arcam AVR200 is a sophisticated audio-video receiver that is designed for home cinema enthusiasts who seek superior sound quality and advanced features. With its sleek design and high-performance capabilities, the AVR200 stands out as an impressive addition to any home theatre setup.

One of the main features of the AVR200 is its comprehensive support for various audio formats. It is equipped with the latest digital processing technologies, including Dolby Digital and DTS decoding, enabling it to deliver immersive surround sound for movies, music, and video games. With a total power output of 100 watts per channel, the AVR200 can drive a wide range of speakers, ensuring a rich and dynamic audio experience.

The Arcam AVR200 supports high-definition video formats and is equipped with multiple HDMI inputs, allowing users to connect several devices like Blu-ray players, gaming consoles, and streaming devices. It is compatible with 4K Ultra HD video pass-through, making it future-proof for upcoming high-resolution content. Additionally, the onboard video scaling technology upscales lower-resolution video to enhance image quality, providing a visually stunning experience.

Another significant characteristic of the AVR200 is its user-friendly interface. The receiver features an intuitive on-screen display that simplifies setup and operation. Users can easily navigate through the menus to select inputs, adjust settings, and customize audio preferences. The inclusion of a remote control further enhances convenience, allowing effortless management of the receiver’s functions from the comfort of a sofa.

Room acoustics can significantly impact audio performance, and the AVR200 incorporates advanced room calibration technology. This feature automatically analyzes the acoustics of the listening environment and adjusts speaker settings accordingly, ensuring optimized performance regardless of room shape or size. This adaptability is crucial for achieving the best sound experience in various home environments.

In terms of connectivity, the AVR200 boasts a variety of options, including coaxial and optical digital inputs, and analog audio connections. Additionally, it features a dedicated 12V trigger output to facilitate easy integration with other equipment, like cinema screens or projectors.

Overall, the Arcam AVR200 combines high-performance audio capabilities with user-friendly features and modern technology, making it an excellent choice for anyone looking to elevate their home theatre experience. With its emphasis on sound quality and video performance, the AVR200 remains a top contender in the competitive market of AV receivers.