NEC GT2000, GT2000R user manual Selecting Auto Start Auto Start

Page 37

Selecting the Background Color When There Is No Signal [Background]

This is the setting of the background color when there is no input signal.

1.Select [Settings Menu] → [Background] from the main menu.

2.Press the cursor ▲/▼ button and select the background color, then press the ENTER button to set.

Blue...The background color will be blue. Black...The background color will be black.

Selecting Auto Start [Auto Start]

When the main power switch is set to ON, this function switches on the power without the need to press the power button.

1.Select [Settings Menu] → [Auto Start] from the main menu.

2.Press the cursor ▲/▼ button and select On/Off, then press the ENTER button to set.

On .... The projector will start up when the main power is switched on.

Off .... The projector will enter the standby mode when the main power is switched on.

Selecting the Automatic Memory Save Function [Auto Save]

This function automatically saves the adjustment conditions to the memory in use when screen adjustments or picture adjustments are performed while projecting the image of the input equipment using user memory or channel memory.

The auto save function saves the information when the MENU and ENTER buttons are used upon exiting from the various adjustment menus.

1.Select [Settings Menu] → [Auto Save] from the main menu.

2.Press the cursor ▲/▼ button and select On/Off, then press the ENTER button to set.

On .... Auto memory saves are enabled. Off .... Auto memory saves are disabled.

Selecting the On-screen Display ON/OFF

[On-screen Mute]

This is a selection of whether or not to show displays other than on- screen menu displays (such as simple condition displays, the ad- justment bar which is displayed when the remote control VOL- UME button is used to make an adjustment, and when switching the input signal).

1.Select [Settings Menu] → [On-screen Mute] from the main menu.

2.Press the cursor ▲/▼ button and select On/Off, then press the ENTER button to set.

On .... Displays will be muted. Off .... Displays will not be muted.

Background

Blue

Black

Auto Start

On

Off

Auto Save

On

Off

Onscreen Mute

On

Off

E-37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents MultiSync GT2000/GT2000R Power Supply InstallationImportant Information RF InterferenceLamp Replacement CleaningFire and Shock Precautions Importantes précautions de sécurité DOC avis de conformationAlimentation Nettoyage Remplacement de la lampePrécautions pour éviter un incendie ou une électrocution Limited Warranty USA and Canada only Table of Contents What’s In The Box? IntroductionGetting To Know Your MultiSync GT2000/GT2000R LCD Projector Top Features Terminal Panel Features External Control Connector Mini D-Sub 15 pin Remote 1 Connector Mini D-Sub 15 pinRemote Input Mini Jack Video Input RCARemote Control Features Contrast SetupBrightness NormalCTLControl Zoom Magnify/Reduce with CTLRemote Jack Attaching the supplied ferrite clamp Remote Control NotesSetting Up Your MultiSync GT2000/ GT2000R LCD Projector InstallationTo adjust the focus on GT2000R Using a Tabletop Or CartDistance Chart GT2000 Standard Zoom Lens Tele Standard Zoom Lens WideCeiling Installation Standard Zoom Lens Wide Rear Screen Projection Reflecting The ImageGT2000R GT2000R Connections Wiring DiagramPC Control Remote 2/PC ConnectorInterface BitsACK Projector to PC Command Communications SequenceSystem Connections Diagram GT2000 ISS-6020 GT2000R Connections with One ISS-6020 SwitcherDIP Switch Settings System Connections Diagram Connections with Multiple ISS-6020 SwitcherSlide Switch Settings ISS-6020 Master GT2000RRGB interface Signal distributor Connecting Multiple ProjectorsOperating Multiple Projector with Remote Control External Control Pin No SignalName FunctionEXT-CTL Pin Assignments Control MethodConnecting Multiple ISS-6020 Switchers Connecting a Single ISS-6020 SwitcherGeneral Controls OperationGetting started On-screen Input Selection Adjust the Screen Size and then Adjust the FocusDefault Settings of the Settings Menu Setup Various SettingsSelecting the On-screen Language Selecting the Automatic Memory Save Function Auto Save Selecting Auto Start Auto StartSelecting the On-screen Display ON/OFF On-screen Mute Setting the Projector ID Number Projector ID Selecting the Switcher Control Method Switcher ControlSelecting the Projector’s Projection Method Pro- jection Sync Signal Termination Setting Sync TerminationSetting Keystone Save Keystone Save Adjusting Keystone Adjustment KeystoneAdjusting the contrast of the picture Contrast Adjustment of the PictureAdjusting the brightness of the picture Brightness Returning to Standard AdjustmentsUsing Digital Zoom Function Using Digital EnlargementTemporarily Turning Off the On-screen Menu Display Returning the RGB Input Signal to the Stan- dard Adjustment Adjusting Keystone DistortionRemote Control Address Setting Temporarily Turning Off the Picture and Au- dioDefault Picture Settings Adjusting the Picture and the Audio PictureAdjusting the Volume Volume Adjusting the White Balance White BalanceSelecting the Image Mode Image Mode Returning the Picture Adjustments to the Stan- dard SettingsSelecting Smoothing Interpolation Selecting the Scan Mode Scan ModeDirect Selection Selecting RGB/YCbCr RGB/YCbCrDefault Screen Adjustment Settings Adjusting the Screen AlignmentScreen Adjustment Procedure Adjusting the Vertical Position Adjusting the Horizontal PositionAdjusting the Clock Frequency Picture Adjust Adjusting the Horizontal Phase Fine Picture Adjusting the Vertical Amplitude Adjusting the Horizontal AmplitudeReducing Noise Image Filter Vertical PhaseSkew Correction Sync Position Adjusting the Alignement Automatically Auto AlignmentClamp Timing Types of Memory Using User Memory and Channel Memory MemoryAutomatic Searches of Memory Selecting Memory Display Memory Selection and Item ContentsSelecting User Memory Selecting the Various Items and SwitchersSelecting Channel Memory Storing the Adjustment Data Store Retrieving All the Data Data Reading of Registration Signals LoadRetrieving Data Other than Source Data Copying All the Data Entry Copy Moving Data Entry Move Deleting a Range of Data Entry Delete Page Changing the Signal Name Name Editing the Memory Contents Source EditPreparations Prior to Editing and Closing the Editing Correrspondence Table for Number Buttons and Letters Example Enter XGAChanging the Image Mode Image Changing the Slot Number of the Switcher SlotSetting the Skip Skip Off Auto search will be effective. Normal Setting Auto Search Forced Lock Source LockViewing the Details of the Input Signal Display Menu Before Using the Switcher Control Functions Controlling the Switcher SwitcherDetailed list of memory Returning the Picture Adjustment to the Standard Set- tings Default Settings of the SwitcherSwitcher Picture Adjustment Audio Control of the Switcher Setting the Volume VolumeTo check and reset the lamp usage time MaintenanceReplacing The Lamp To replace the lampRemote Control Battery Installation Cleaning Or Replacing The FilterInstalling the Remote Control Batteries Etape Pour remplacer la lampeInstallation des piles de la télécommande Nettoyage ou remplacement du filtreStatus Light Messages TroubleshootingProblem Check These Items Common Problems & SolutionsOptical SpecificationsElectrical MechanicalGT2000 Cabinet DimensionsPC 15-Pin mini D-Sub Sub Pin AssignmentsHdtv Displayable Video SignalsCommand Codes PC Control Command ReferenceInterpolation Change Default Standard Memory Search Lamp Usage Reset

GT2000, GT2000R specifications

The NEC GT2000 and GT2000R are renowned projectors that have established themselves in the realm of high-performance visual equipment, catering primarily to the needs of businesses and educational institutions. These projectors are celebrated for their exceptional image quality, versatility, and advanced features, making them a popular choice among users seeking reliability and performance.

One of the primary features of the GT2000 series is its high brightness capability. With a brightness of up to 2,500 ANSI lumens, these projectors can deliver clear and vibrant images even in well-lit environments, ensuring that presentations and lectures maintain their visual integrity regardless of ambient light conditions. This makes them ideal for large conference rooms and classrooms where visibility is crucial.

The GT2000 series also boasts impressive resolution specifications. The GT2000 offers a native resolution of XGA (1024x768 pixels), while the GT2000R enhances this to a WXGA (1280x800 pixels), providing a wider aspect ratio and higher detail for images. This improved resolution is particularly beneficial for displaying detailed graphics, charts, and videos, making them suitable for a variety of presentation types.

In terms of connectivity, the GT2000 and GT2000R projectors are equipped with multiple input options including VGA, composite video, and audio inputs. This versatility allows for seamless integration with various devices, such as laptops, DVD players, and even mobile devices, further enhancing their usability in different settings.

Another noteworthy characteristic of the GT2000 series is its advanced color reproduction technology. NEC employs a 3LCD technology in these projectors, which ensures vibrant colors and deep blacks, resulting in images that are both engaging and lifelike. This technology minimizes the possibility of color distortion, offering consistent and accurate color performance.

Users will also appreciate the long lamp life offered by the GT2000 and GT2000R, with lamps typically lasting up to 5,000 hours in eco mode. This not only reduces maintenance costs but also enhances the overall efficiency of the projector.

In conclusion, the NEC GT2000 and GT2000R projectors are equipped with a robust set of features, from high brightness and resolution to advanced connectivity options and color accuracy. Their durability and reliability make them ideal for professional and educational environments, meeting the demands of users who require high-quality projections for effective communication and learning.
Top Page Image Contents