NEC GT2000, GT2000R user manual Setting the Volume Volume, Audio Control of the Switcher

Page 72

Audio Control of the Switcher

This is the audio adjustment of the switcher AUDIO OUTPUT.

Setting the Volume (Volume)

This function sets the volume adjustment data that corresponds to the slot.

Select [Switcher] from the main menu.

Press the cursor ▲/▼ button and select [Volume].

When the item to be adjusted is selected, the adjustment bar of the selected item is displayed at the bottom edge of the display.

Adjust with the cursor ◀ (–)/▶(+) button.

The adjustment range is from 0 to 63.

(–)Direction .......... The volume decreases.

(+) Direction .......... The volume increases.

Switcher

RGain G Gain B Gain Color Tint Sharpness Volume Audio Select

– +32

Adjusting Volume of Switcher with Remote Control (Audio Select)

This is a setting that adjusts the volume of the switcher with the VOLUME button on the remote control.

Select [Switcher] → [Audio Select] of the main menu.

When the item to be adjusted is selected, the setting condition is displayed at the bottom edge of the display.

A press of the ENTER button changes the display to the audio control display. Press the cursor ▲/▼ button and select Switcher / Remote control.

Switcher

Permits volume adjustment of the switcher using the

 

VOLUME button of the remote control.

Projector

Permits volume adjustment of the projector using the

 

VOLUME button of the remote control.

*The Switcher menu displays only when the switcher is connected with the GT2000/GT2000R and Switcher Control mode is set to either SW 1 Level or SW 2 Level.

Note:When the switcher is not connected, "Switcher" cannot be selected.

Switcher

RGain G Gain B Gain Color Tint Sharpness Volume Audio Select Projector

E-72

Page 71 Page 73
Image 72
Page 71 Page 73
Contents MultiSync GT2000/GT2000R Installation Power SupplyImportant Information RF InterferenceCleaning Lamp ReplacementFire and Shock Precautions DOC avis de conformation Importantes précautions de sécuritéAlimentation Remplacement de la lampe NettoyagePrécautions pour éviter un incendie ou une électrocution Limited Warranty USA and Canada only Table of Contents Introduction What’s In The Box?Getting To Know Your MultiSync GT2000/GT2000R LCD Projector Top Features Terminal Panel Features Remote 1 Connector Mini D-Sub 15 pin External Control Connector Mini D-Sub 15 pinRemote Input Mini Jack Video Input RCARemote Control Features Setup ContrastBrightness NormalZoom Magnify/Reduce with CTL CTLControlRemote Jack Remote Control Notes Attaching the supplied ferrite clampInstallation Setting Up Your MultiSync GT2000/ GT2000R LCD ProjectorUsing a Tabletop Or Cart To adjust the focus on GT2000RDistance Chart GT2000 Standard Zoom Lens Wide Standard Zoom Lens TeleCeiling Installation Standard Zoom Lens Wide Reflecting The Image Rear Screen ProjectionGT2000R GT2000R Wiring Diagram ConnectionsRemote 2/PC Connector PC ControlInterface BitsCommand Communications Sequence ACK Projector to PCConnections with One ISS-6020 Switcher System Connections Diagram GT2000 ISS-6020 GT2000RDIP Switch Settings Connections with Multiple ISS-6020 Switcher System Connections DiagramSlide Switch Settings ISS-6020 Master GT2000RConnecting Multiple Projectors RGB interface Signal distributorOperating Multiple Projector with Remote Control Pin No SignalName Function External ControlEXT-CTL Pin Assignments Control MethodConnecting a Single ISS-6020 Switcher Connecting Multiple ISS-6020 SwitchersOperation General ControlsGetting started Adjust the Screen Size and then Adjust the Focus On-screen Input SelectionSetup Various Settings Default Settings of the Settings MenuSelecting the On-screen Language Selecting Auto Start Auto Start Selecting the Automatic Memory Save Function Auto SaveSelecting the On-screen Display ON/OFF On-screen Mute Selecting the Switcher Control Method Switcher Control Setting the Projector ID Number Projector IDSync Signal Termination Setting Sync Termination Selecting the Projector’s Projection Method Pro- jectionAdjusting Keystone Adjustment Keystone Setting Keystone Save Keystone SaveAdjustment of the Picture Adjusting the contrast of the picture ContrastAdjusting the brightness of the picture Brightness Returning to Standard AdjustmentsUsing Digital Enlargement Using Digital Zoom FunctionTemporarily Turning Off the On-screen Menu Display Adjusting Keystone Distortion Returning the RGB Input Signal to the Stan- dard AdjustmentRemote Control Address Setting Temporarily Turning Off the Picture and Au- dioAdjusting the Picture and the Audio Picture Default Picture SettingsAdjusting the White Balance White Balance Adjusting the Volume VolumeReturning the Picture Adjustments to the Stan- dard Settings Selecting the Image Mode Image ModeSelecting the Scan Mode Scan Mode Selecting Smoothing InterpolationSelecting RGB/YCbCr RGB/YCbCr Direct SelectionAdjusting the Screen Alignment Default Screen Adjustment SettingsScreen Adjustment Procedure Adjusting the Horizontal Position Adjusting the Vertical PositionAdjusting the Clock Frequency Picture Adjust Adjusting the Horizontal Phase Fine Picture Adjusting the Horizontal Amplitude Adjusting the Vertical AmplitudeVertical Phase Reducing Noise Image FilterSkew Correction Adjusting the Alignement Automatically Auto Alignment Sync PositionClamp Timing Using User Memory and Channel Memory Memory Types of MemoryAutomatic Searches of Memory Memory Selection and Item Contents Selecting Memory DisplaySelecting the Various Items and Switchers Selecting User MemorySelecting Channel Memory Storing the Adjustment Data Store Data Reading of Registration Signals Load Retrieving All the DataRetrieving Data Other than Source Data Copying All the Data Entry Copy Moving Data Entry Move Deleting a Range of Data Entry Delete Page Editing the Memory Contents Source Edit Changing the Signal Name NamePreparations Prior to Editing and Closing the Editing Example Enter XGA Correrspondence Table for Number Buttons and LettersChanging the Slot Number of the Switcher Slot Changing the Image Mode ImageSetting the Skip Skip Setting Auto Search Forced Lock Source Lock Off Auto search will be effective. NormalViewing the Details of the Input Signal Display Menu Controlling the Switcher Switcher Before Using the Switcher Control FunctionsDetailed list of memory Default Settings of the Switcher Returning the Picture Adjustment to the Standard Set- tingsSwitcher Picture Adjustment Setting the Volume Volume Audio Control of the SwitcherMaintenance To check and reset the lamp usage timeReplacing The Lamp To replace the lampCleaning Or Replacing The Filter Remote Control Battery InstallationInstalling the Remote Control Batteries Pour remplacer la lampe EtapeNettoyage ou remplacement du filtre Installation des piles de la télécommandeTroubleshooting Status Light MessagesCommon Problems & Solutions Problem Check These ItemsSpecifications OpticalElectrical MechanicalCabinet Dimensions GT2000Sub Pin Assignments PC 15-Pin mini D-SubDisplayable Video Signals HdtvPC Control Command Reference Command CodesInterpolation Change Default Standard Memory Search Lamp Usage Reset

GT2000, GT2000R specifications

The NEC GT2000 and GT2000R are renowned projectors that have established themselves in the realm of high-performance visual equipment, catering primarily to the needs of businesses and educational institutions. These projectors are celebrated for their exceptional image quality, versatility, and advanced features, making them a popular choice among users seeking reliability and performance.

One of the primary features of the GT2000 series is its high brightness capability. With a brightness of up to 2,500 ANSI lumens, these projectors can deliver clear and vibrant images even in well-lit environments, ensuring that presentations and lectures maintain their visual integrity regardless of ambient light conditions. This makes them ideal for large conference rooms and classrooms where visibility is crucial.

The GT2000 series also boasts impressive resolution specifications. The GT2000 offers a native resolution of XGA (1024x768 pixels), while the GT2000R enhances this to a WXGA (1280x800 pixels), providing a wider aspect ratio and higher detail for images. This improved resolution is particularly beneficial for displaying detailed graphics, charts, and videos, making them suitable for a variety of presentation types.

In terms of connectivity, the GT2000 and GT2000R projectors are equipped with multiple input options including VGA, composite video, and audio inputs. This versatility allows for seamless integration with various devices, such as laptops, DVD players, and even mobile devices, further enhancing their usability in different settings.

Another noteworthy characteristic of the GT2000 series is its advanced color reproduction technology. NEC employs a 3LCD technology in these projectors, which ensures vibrant colors and deep blacks, resulting in images that are both engaging and lifelike. This technology minimizes the possibility of color distortion, offering consistent and accurate color performance.

Users will also appreciate the long lamp life offered by the GT2000 and GT2000R, with lamps typically lasting up to 5,000 hours in eco mode. This not only reduces maintenance costs but also enhances the overall efficiency of the projector.

In conclusion, the NEC GT2000 and GT2000R projectors are equipped with a robust set of features, from high brightness and resolution to advanced connectivity options and color accuracy. Their durability and reliability make them ideal for professional and educational environments, meeting the demands of users who require high-quality projections for effective communication and learning.
Top Page Image Contents