Chapter 2 Installing the LCD TV
METHOD A:
Use a supplied antenna cable to connect the NTSC signal to the LCD TV’s TV CABLE terminal.
TV HDTV
CABLE AIR
VHF/UHF IN
B
A
METHOD B:
Use a supplied antenna cable to connect the ATSC signal to the LCD TV’s HDTV AIR terminal.
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. 
TV HDTV
CABLE AIR
VHF/UHF IN
ENGLISH
This TV is equipped with a safety fuse. In the event of an electrical storm or power outage the safety fuse is designed to protect your TV. If your TV has no power, check the fuse by prying the cover off, following the illustration below. If the fuse is blown, visit your local hardware store and ask for a 4A 250V - 5x20mm Time Lag Fuse (Slow Blow) to replace the fuse.
NOTE: Unplug the AC power cord from the back of your TV before removing the fuse.
Firm Plastic Prying Tool | D |
(Using a metal tool may cause shock) | |
| 4A 250V |
Back of TV | 5x20mm |
Fuse | |
Press the 
button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the main voltage when the LCD TV will not be used for a long period of time. The POWER button on the front panel is only used for switching the LCD TV into standby, it does not disconnect the device from the main voltage. To completely disconnect the main voltage, please remove the power plug from the socket.
Press the Input button on the remote to display the Input List. Use the ▲► buttons to select TV( METHOD A), or HDTV (METHOD B), and press the OK button.
Input
TV(CABLE/AIR)
HDTV (CABLE/AIR)
VIDEO1 (SIDE)
VIDEO2 (REAR)
VIDEO3
VIDEO4 (YPbPr1)
VIDEO5 (YPbPr2)
VIDEO6 (HDMI)
COMPUTER (VGA)
17