Polaroid TTM-2401 To skip unwanted channel, To restore a skipped channel, Manual Fine Tuning

Tuning in

TV/AV

			STEREO
1	2	3	Direct channel
			select buttons
			CCD
4	5	6
			DSP
7	8	9	DSP

MUTE

0

SCAN P

To skip unwanted channel

After presetting the channels, you can skip unwanted channels so that only the channels you want to watch are selected with Channel up/down buttons.

1 Select the unwanted channel with channel select buttons.

	O r p r e s s M E N U b u t t o n
	repeatedly to		display		Search		Search
	menu,	press	CH-	or	CH+ to	Signal Input	Air
	select	Channel		menu item,
						Channel	28
	press V- or V+ to select the					Skip	On
	unwanted channel.					Auto Search	Press V+
2						Fine tune	0
	Press CH- or CH+ to select Skip,
	press V- or V+ to select Skip ON.

Thus, after exiting the menu, the channel will then be skipped when you select programs with the Channel up/down button.

If you want to skip other unwanted channels, repeat steps above to change the channel number.

Note: you can select the skipped channel by pressing the direct channel select buttons.

	CH+
V-	MENU	V+	Menu control buttons
	CH-

To restore a skipped channel

Use direct channel select buttons (0-9) to select the channel you want to restore. Enter into Search menu, press CH- or CH+ to select Skip, press V- or V+ to select Skip Off.

Manual Fine Tuning

Fine tuning is not necessary under normal conditions. However, in some areas where there is interference, some adjustment may be necessary for better picture and sound. To fine tune a channel:

1 Select the channel you want to fine-tune.

2	Enter into Search menu, press		Search
		Signal Input	Air
	CH- or CH+ to select Fine Tune,	Channel	28
	then press and hold V- or V+ to
		Skip	Off
	fine tune the channel until the
		Auto Search	Press V+
	best possible picture and sound
		Fine tune	-5

are achieved.

* To exit the menu, press DSP button or	(Press V- to	fine-tune downward and	V+ to fine-tune
	upward. The	AFT function will be set	to OFF mode

repeatedly press MENU button. automatically)

Auto Fine Tuning (AFT)

If Fine Tuning makes the picture and sound of a channel poor, you can correct this by using AFT.

1

2

Enter into Search menu, press CH- to select AFT.		Search
	Channel	28
	Skip	Off
Press V- or V+ to select AFT On.	Auto Search	Press V+
	Fine tune	-5
	AFT	On

13