Preparing the remote control
Installing batteries
1
Effective range of the Remote
Open the battery cover.
2
Install two "AA” batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment.
3
Replace the battery cover.
Notes:
Do not recharge batteries that are not intended to be recharged.
Use only the size and type of batteries specified. Do not mix different types of batteries together or old batteries with fresh ones.
When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries.
Do not throw the batteries into a fire. Recycle used batteries in the specified manner.
Do not drop, dampen or disassemble the remote control.
30 | O |
30 | |
| O |
5m
Notes:
When there is an obstacle between the TV and the transmitter, the transmitter may not operate.
When direct sunlight, and incandescent lamp, fluorescent lamp or any other strong light shines on the REMOTE SENSOR of the TV, the remote operation may be unstable.
7