Hitachi JPEG2000 manual Event popup setup, Buzzer setup

Page 32

JPEG2000 Stand alone DVR User Guide

4-3-6 Event popup setup

1.[CHANNEL]

Use [+] and [-] to select a channel.

2.[POPUP ON/OFF]

Set up the POPUP function ON/OFF: Use [+] and [-] to select ON or OFF. When there is an event, the screen display will switch to a full screen of the corresponding channel.

3.[EVENT]

Use [+] and [-] to select the event type that will trigger the POPUP:

A- Alarm / M- Motion / AM- Alarm or Motion.

4.[DURATION]

Use [+] and [-] to set up a duration of the POPUP. The setting range is from 1 second to 60 seconds. When the Event POPUP finishes, 4CH DVR returns to its Quad screen display, 8CH DVR 9 -Split screen display, and 16CH DVR 16-Split screen display.

4-3-7 Buzzer setup

Set up the condition that triggers the buzzer to beep. Use [UP] and [DOWN] to select an itme and press ENTER to turn ON or OFF the selection.

1.[ALL]

Turn ON or OFF of all the conditions that tigger the buzzer to beep. You can also setup the buzzer by the conditions. Move the cursor to the desired selection and press ENTER to turn ON or OFF the selection.

2.[KEY BEEP]

Turn on/off the beep while operating the front panel.

3.[VIDEO LOSE]

Turn on/off the beep at the video lose.

4.[ALARM ACTIVE]

Turn on/off the beep when an alarm is triggered.

5.[MOTION DETECT]

Turn on/off the beep when motion is detected.

1.When the buzzer is triggered to beep, press any button on the front panel to turn off the Beep.

2.The beeping can only be turned off manually. There is no time out setup to turn off the Beeping automactically.

- 32 -

Image 32
Contents JPEG2000 Stand alone DVR User Guide CHAP.5 CD-R bck-up CHAP.6 PTZ camera controlCHAP.7 Network & remote software AppendixPackage Specification Assistant Functions Mechanism DimensionNetwork CHAP.1 Appearance Front panel introductionSearch FreezeBack panel introduction EthernetIR remote controller introduction SEARCH/-/+/NEXTCHAP.2 Installation Camera and monitor installationCamera installation Monitor and VCR installationSensor and alarm installation Loop out installationSensor installation Input & OutputNetwork and serial port installation Relay output installationNetwork setup Serial port setupPTZ camera installation Dvmr unit Other device PCHDD installation StepsPower plugging Display configuration CHAP.3 OperationScreen switch/OSD position adjust Freeze in split modePIP view Freeze viewFreeze in Full mode View in sequenceZoom view Key lockRecord Search BARSearch mode PlaybackPlay/Stop TIME/DATEEvent List Search BARTIME/DATE Playback speed adjustments Adjust Playback speed by IR remote controllerCHAP.4 Set Up Log-InDVR LOG-IN System MenuDisplay setup Monitor SetupScreen Display Screen displayConfiguration Monitor setupHDD management Camera Title Time/date setupCamera setup Camera Color Setup Camera Active SetupMotion Setup StatusMotion Mask Setup ChannelSensitivity Grade Motion Display TypeInterval setup Alarm setupEvent popup setup Buzzer setupPassword setup User IDUser PW Confirm PWRecord setup Record configurationResolution Record in AlarmRecord in Motion Continuous RecordSchedule record Time Cell Time Zone WeekHoliday setup Back-upTCP/IP Setup RS232C SetupPantilt Setup 1 TCP/IP setupIP Config Setup Ddns Setup 2 RS232C setup Connection SetupDhcp Setup Pantilt setup Command SetupLanguage Factory defaultSpeed Setup Data backup CHAP.5 CD-R Back-up2CD Player software installation Click Install CD-R backup player to start the installation3CD Player software interface Fast Rewind Fast Forward Pause To the beginning To the endSave as AVI file Open AJP fileSave JPG file PTZ camera Installation Connection SetupPTZ setup CHAP.6 PTZ camera controlPTZ camera operation Operate by PTZ control keysNetwork installation and setup CHAP.7 Network and client softwareNetwork Introduction Via CableVia Adsl Via Adsl with Static IP addressVia Adsl with Dynamic IP Router setup WAN connection type Static IP setupPPPoE setup Virtual server setup4Client software Install and setup Install Client softwareSoftware operation Remote viewer interfaceClient software setup PasswordDVR Name IP ListDdns Setup List PAN/TILT Control PTZ controlFocus Remote playback Remote Playback InterfaceRemote Playback Operation Playback by Event ListRemote software setup f PTZ/SAVE Back up via Client softwarePrint the recorded data Save AS AVIDdns setup and operation Ddns Server setupJPEG2000 Stand alone DVR User Guide DVR setup Go to System MENUf External DEVICEfTCP/IP Setup fDDNS SetupDdns Info Save/LoadConfiguration of Ddns connection Remote Live View via IE Browser Web Network Backup Backup Procedure Play backup file ※ The AVI file path will be saved under C\WEBBACKUP Save AVI fileAppendix.1 Record time table 4ch DVR16ch DVR Appendix.2 System configuration Appendix.3 Firmware upgrade Install USB driverJPEG2000 Stand alone DVR User Guide Install USB upgrade program Please select Install USB upgrade programAllupdate、Update Boot Upgrade firmwareUpdate procedures 、Update F/W Appendix.4 Play only mode Enter Play only ModeIntroduction Search

JPEG2000 specifications

Hitachi JPEG2000 is a high-performance image compression technology that utilizes advanced coding techniques to provide superior image quality while maintaining a smaller file size. It is built upon the JPEG2000 standard, which was developed by the Joint Photographic Experts Group (JPEG) to address limitations in traditional JPEG compression methods, particularly in terms of scalability, quality, and error resilience.

One of the main features of Hitachi JPEG2000 is its use of wavelet compression. Unlike the Discrete Cosine Transform (DCT) employed in standard JPEG, which works on small blocks of images, JPEG2000 utilizes a wavelet transform that allows for multi-resolution analysis of images. This means that images can be compressed at various quality levels, enabling users to access lower-resolution versions without needing to decompress the entire image. This scalability is particularly beneficial for applications like streaming and remote visualization, where bandwidth may be limited.

Another significant characteristic is its superior error resilience. Hitachi JPEG2000 is designed to gracefully handle data corruption that can occur during transmission. This feature is crucial for applications in medical imaging or satellite imagery, where maintaining image integrity is essential. The technology allows for random access to image components, enabling portions of an image to be retrieved without needing to decode the entire file. This capability enhances efficiency when dealing with large datasets.

Additionally, Hitachi JPEG2000 supports lossless compression, meaning that the original image quality can be preserved without any loss of data during compression. This is particularly important for fields such as healthcare, where diagnostic imaging requires absolute precision. The algorithm also offers adjustable compression rates, providing flexibility for different use cases without compromising quality.

The technology is widely implemented in various industries, including broadcasting, film production, and medical imaging, thanks to its ability to deliver high-quality images in a manageable file size. As a versatile solution, Hitachi JPEG2000 stands out with its combination of advanced compression techniques, error resilience, and scalability, making it a preferred choice in an increasingly digital world where efficient data handling is paramount.