Hitachi JPEG2000 manual Record setup, Record configuration

Page 34

JPEG2000 Stand alone DVR User Guide

4-4 Record setup

1.[RECORD CONFIGURATION]

Set up overwrite, recording mode, picture quality, resolution, and recording speed.

2.[SCHEDULE SETUP]

Program the recording schedule.

3.[HOLIDAY SETUP]

Set up holidays, max. 100 days.

4-4-1 Record configuration

Use [UP] and [DOWN] to select an item. Use [+] and [-] to change the value.

1.[OVERWRITE]

ON: When the hard drive is full, the system will overwrite the earliest recorded data. If the DVR has two hard drives, the overwriting starts from the Master drive.

OFF: The system stops recording when the hard drive is full. If the DVR has two hard drives, the system stops recroding when the Master and Slave drive both are full.

2.[MUTIPLEX]

Set up the multiplex mode

Duplex: allow record and remote connection simultaneously. The DVR stops recording while the DVR enters playback either locally or remotely.

During the remote connection, the DVR keeps recording if the client stays at the LIVE mode. It stops recording when the client enters the playback mode.

Triplex: record and playback simultaneously. The DVR keeps recording while the DVR enters playback either locally or remotely.

Under the Triplex mode, you may see the playback is slower than it is under the Duplex mode. The DVR uses the same component to process recording and the playback. As a result, the recording and the playback speed drop by 50% when the DVR enters playback under the Triplex mode.

3.[QUALITY]

Set up the recording picture quality Quality level:

4CH: Low / Mid / High / Super / Hyper

8CH and 16CH: Basic / Normal / Enhanced / Fine / Super Fine.

- 34 -

Image 34
Contents JPEG2000 Stand alone DVR User Guide CHAP.7 Network & remote software CHAP.5 CD-R bck-upCHAP.6 PTZ camera control AppendixPackage Specification Network Mechanism DimensionAssistant Functions CHAP.1 Appearance Front panel introductionSearch FreezeBack panel introduction EthernetIR remote controller introduction SEARCH/-/+/NEXTCamera installation CHAP.2 InstallationCamera and monitor installation Monitor and VCR installationSensor installation Sensor and alarm installationLoop out installation Input & OutputNetwork setup Network and serial port installationRelay output installation Serial port setupPTZ camera installation Dvmr unit Other device PCHDD installation StepsPower plugging Display configuration CHAP.3 OperationPIP view Screen switch/OSD position adjustFreeze in split mode Freeze viewFreeze in Full mode View in sequenceZoom view Key lockRecord Search BARPlay/Stop Search modePlayback TIME/DATETIME/DATE Search BAREvent List Playback speed adjustments Adjust Playback speed by IR remote controllerDVR LOG-IN CHAP.4 Set UpLog-In System MenuScreen Display Display setupMonitor Setup Screen displayConfiguration Monitor setupHDD management Camera setup Time/date setupCamera Title Motion Setup Camera Color SetupCamera Active Setup StatusSensitivity Grade Motion Mask SetupChannel Motion Display TypeInterval setup Alarm setupEvent popup setup Buzzer setupUser PW Password setupUser ID Confirm PWRecord setup Record configurationRecord in Motion ResolutionRecord in Alarm Continuous RecordSchedule record Time Cell Time Zone WeekHoliday setup Back-upPantilt Setup TCP/IP SetupRS232C Setup 1 TCP/IP setupIP Config Setup Ddns Setup Dhcp Setup Connection Setup2 RS232C setup Pantilt setup Command SetupSpeed Setup Factory defaultLanguage Data backup CHAP.5 CD-R Back-up2CD Player software installation Click Install CD-R backup player to start the installation3CD Player software interface Fast Rewind Fast Forward Pause To the beginning To the endSave JPG file Open AJP fileSave as AVI file PTZ setup PTZ camera InstallationConnection Setup CHAP.6 PTZ camera controlPTZ camera operation Operate by PTZ control keysNetwork Introduction Network installation and setupCHAP.7 Network and client software Via CableVia Adsl Via Adsl with Static IP addressVia Adsl with Dynamic IP Router setup WAN connection type Static IP setupPPPoE setup Virtual server setup4Client software Install and setup Install Client softwareSoftware operation Remote viewer interfaceDVR Name Client software setupPassword IP ListDdns Setup List Focus PTZ controlPAN/TILT Control Remote playback Remote Playback InterfaceRemote Playback Operation Playback by Event ListPrint the recorded data Remote software setup f PTZ/SAVEBack up via Client software Save AS AVIDdns setup and operation Ddns Server setupJPEG2000 Stand alone DVR User Guide DVR setup Go to System MENUf External DEVICEfTCP/IP Setup fDDNS SetupDdns Info Save/LoadConfiguration of Ddns connection Remote Live View via IE Browser Web Network Backup Backup Procedure Play backup file ※ The AVI file path will be saved under C\WEBBACKUP Save AVI fileAppendix.1 Record time table 4ch DVR16ch DVR Appendix.2 System configuration Appendix.3 Firmware upgrade Install USB driverJPEG2000 Stand alone DVR User Guide Install USB upgrade program Please select Install USB upgrade programAllupdateUpdate procedures Upgrade firmware、Update Boot 、Update F/W Introduction Appendix.4 Play only modeEnter Play only Mode Search

JPEG2000 specifications

Hitachi JPEG2000 is a high-performance image compression technology that utilizes advanced coding techniques to provide superior image quality while maintaining a smaller file size. It is built upon the JPEG2000 standard, which was developed by the Joint Photographic Experts Group (JPEG) to address limitations in traditional JPEG compression methods, particularly in terms of scalability, quality, and error resilience.

One of the main features of Hitachi JPEG2000 is its use of wavelet compression. Unlike the Discrete Cosine Transform (DCT) employed in standard JPEG, which works on small blocks of images, JPEG2000 utilizes a wavelet transform that allows for multi-resolution analysis of images. This means that images can be compressed at various quality levels, enabling users to access lower-resolution versions without needing to decompress the entire image. This scalability is particularly beneficial for applications like streaming and remote visualization, where bandwidth may be limited.

Another significant characteristic is its superior error resilience. Hitachi JPEG2000 is designed to gracefully handle data corruption that can occur during transmission. This feature is crucial for applications in medical imaging or satellite imagery, where maintaining image integrity is essential. The technology allows for random access to image components, enabling portions of an image to be retrieved without needing to decode the entire file. This capability enhances efficiency when dealing with large datasets.

Additionally, Hitachi JPEG2000 supports lossless compression, meaning that the original image quality can be preserved without any loss of data during compression. This is particularly important for fields such as healthcare, where diagnostic imaging requires absolute precision. The algorithm also offers adjustable compression rates, providing flexibility for different use cases without compromising quality.

The technology is widely implemented in various industries, including broadcasting, film production, and medical imaging, thanks to its ability to deliver high-quality images in a manageable file size. As a versatile solution, Hitachi JPEG2000 stands out with its combination of advanced compression techniques, error resilience, and scalability, making it a preferred choice in an increasingly digital world where efficient data handling is paramount.