System Setup

GENERAL SET-UP

You can change the default settings to customize performance to your own preference.

1.Remove the disc from the DVD drive and press the ‘SETUP’ button on the remote control, the settings menu will appear. It includes General Setup, Speaker Setup, Dolby Digital Setup, Video Setup and Preference setup.

2. Press

(direction buttons) on the remote control to select a category.

3.All the items in the category will appear on the TV screen. Press the ‘ENTER’ button to confirm your selection.

Category

1.	When you enter a category all the items under this category will		appear, and
the items		placed in the middle (or highlighted) will be the current	set up.
2.	Press	(right direction button) on the remote control to select the correct category.

3.Press the direction button to select your preference. The item you select will be highlighted.

4.Press the ‘ENTER’ button for confirmation.

5.Press (left direction button) to enter the other setup menu.

General Setup

The general setup is shown as follows:

1.TV Display

Select Normal/PS when a 4:3 TV is connected.

Display images with marking bars above and below the picture. Select Wide when a 16:9 wide screen TV is connected.

2.Angle Mark

If the scene was shot from multiple angles, then you can easily change the camera angle of the scene you are watching.

ON/OFF

With this switched on you will be notified if alternative viewing angles are available.

3.OSD Lang

There are five kinds of different OSD languages for selection. You can select it according to your preference.

- 18 -