HOW TO USE THE REMOTE TO CONTROL YOUR TV
TV POWER button
Press this button to turn the TV set on or off.
SLEEP button
Press this button to display the SLEEP TIMER in the lower left corner of the screen. Every subsequent press of this button will add 15 minutes to the timer, up to a maximum of three hours.
MENU, CURSOR buttons
All
The MENU button will start the
The CURSOR buttons will highlight functions or adjust and set different features when MENU is pressed.
The CURSOR button will move PIP position when PIP is on. (32/36UX01S models only)
CURSOR buttons will also give you acces to FAMILY FAVORITES
CHANNEL SELECTOR buttons
Enter two or three numbers to select channels. Enter 0 first for channels 1 to 9. For channels 100 and above, press the 1 button and wait for two seconds before pressing the last two digits of the channel.
Channel selection may also be performed by pressing CH up ( ) or down ( ).
You may also use these buttons for channel scanning. Press and hold the CH up ( ) or down ( ) buttons and the TV will start quickly scanning through the channels. Release the CH up ( ) or down ( ) buttons when the TV scans to the channel you wish to watch and the TV will tune to that channel.
NOTE: The TV may not receive some channels if you are not in the correct SIGNAL SOURCE mode. (see page 35)
LAST CHANNEL button
Use this button to select between the last two channels viewed. (Good for watching two sporting events, etc.)
ANT A 28
MINA
LAST CH
ANT A 30 MI
22