REMOTE CONTROL BATTERY INSTALLATION
AND REPLACEMENT
1.Open the battery cover of the remote control by pushing the notched part of the cover with your fingers.
2.Insert two new AA size batteries for the remote control. When replacing old batteries, push
them towards the springs and lift them out.
3. Match the batteries to the (+) and
4. Replace the cover.
BOTTOM VIEW
Push in and lift up on tab to
Lift up on tab to remove back cover.
remove back cover.
CAUTION:
1.If your television set is to remain unused for a long period of time, for instance when you go on vacation, unplug the television from the wall outlet.
2.Do not subject the remote control to shocks such as dropping it on the floor, etc. Precision parts may be damaged.
3.Do not allow the remote control to become wet and avoid placing it in areas of high humidity. Do not leave it on or near a heater. Excess heat or moisture may cause the unit to cease operation.
4.If the batteries become exhausted, remote control operation may become erratic or stop altogether. Replace the old batteries with new AA type.
NOTES:
1.The CHANNEL NO., VOLUME and OFF TIMER indicator are not displayed simultaneously.
2.To operate your TV, point the remote control at the remote sensor of the TV.
6