Hitachi 36SDX88B manual Hookup Cables

HOOKUP CABLES

Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components and the length of each cable.

300-Ohm Twin Lead Connector

This outdoor antenna cable must be connected to an antenna adapter (300-Ohm to 75-Ohm).

Phono Connector

Used on all standard video and audio cables which connect to inputs and outputs located on the PC ready color television s rear jack panel and front control panel.

F Type 75-Ohm Coaxial Antenna Connector

For connecting RF signals (antenna or cable TV) to the antenna jack on the television.

S-Video (Super Video) Connector

This connector is used on camcorders, VCRs and laser- disc players with an S-Video feature in place of the standard video cable to produce a high quality picture.

PC AUDIO OUT
3.5 mm	2	Mouse Connector Cable (Provided)
	RCA Type
Stereo

Mini Plug	Plugs
	This cable is used to connect the computer mouse port
	to the TV/monitor mouse output for remote control
	mouse operation.
	Monitor Audio In
	PC Audio Out

Stereo Cable (3.5 mm plug to 3.5 mm plug) (Optional)

This cable is used to connect from Audio out jack on the back of the computer s sound card to the PC Audio input Jack of the monitor.

D-SUB MINI 15-Pin Cable (Optional)

This cable is used to connect a computer VGA output to the D-SUB input located on the rear panel.

9