01EN01DVDS253A(AU).book Page 15 Wednesday, June 7, 2006 3:39 PM
Connecting to an Amplifier
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic
Connect the Left and Right AUDIO OUT jacks on the recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A).
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a
1.Connect one of the recorder’s DIGITAL AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.
2.You will need to activate the recorder’s digital output. (See “Audio Settings” on page 19).
Digital Multi-channel sound
A digital
Caution
Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.
Notes:
•Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital
•To see the audio format of the current DVD in the on- screen display, press AUDIO.
•This recorder does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this recorder to a DTS compatible receiver via one of this recorder’s digital audio outputs.
Rear of the recorder
Hookup and Settings
Amplifier (Receiver)
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the
“DTS” and “DTS Digital Out” are trademarks of DTS, Inc.
15