01EN01DVDS253A(AU).book Page 21 Wednesday, June 7, 2006 3:39 PM
If you forget your 4-digit code
If you forget your password, to clear the current password, follow the procedure below.
1.Press SETUP to display the Setup menu.
2.Use the Number buttons to enter the
3.Select [Yes] then press ENTER. The
Area Code
Enter the code of an area whose standards were used to rate the DVD video disc, referring to the list (see “Area Codes” on page 58).
1.Select [Area Code] option then press X.
2.Enter the password.
3.Follow step 2 as shown “Rating”.
4.Select the first character using the S / T buttons.
5.Shift the cursor using X buttons and select the second character using S / T buttons.
6.Press ENTER to confirm your area code selection, then press SETUP to exit the menu.
Note:
There is no password set under the default factory settings.
DivX® Registration Code DivX
We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod.
1.Select [DivX Reg. Code] option then press X.
2.Press ENTER while [View] is selected and the registration code will appear.
3.Use the registration code to purchase or rent the videos from DivX® VOD service at www.divx.com/ vod. Follow the instructions and download the video onto a disc for playback on this unit.
Note:
All the downloaded videos from DivX® VOD can only be played back on this unit.
Recording Settings
| and Settings |
You can set the picture quality for recording; | Hookup |
Record Mode Set |
|
XP (High Quality), SP (Standard Quality), |
|
LP (Low Quality), EP (Extend Quality). |
|
|
|
1.Select [Rec Mode Set] option then press X.
2.Use S / T to select a desired Record Mode (XP, SP, LP or EP).
3.Press ENTER to confirm your selection, then press SETUP to exit the menu.
Record Aspect
When DVD recording, you can set the recording aspect ratio to suit the material you’re recording (16:9 or 4:3). Set [Rec Aspect] to match the aspect ratio of your TV.
DV Recording Audio
You need to set this if you have a camcorder using
Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.
TV Recording Audio
When TV recording with bilingual, you can choose audio channel to record.
[Main+Sub] Main language and Sub language [Main] Main language only
[Sub] Sub language only
21