Hitachi 32HDL52, 37HDL52 important safety instructions Setting UP Your DTV, Channel, Auto Scan

SETTING UP YOUR DTV

1.Make sure the physical connection is properly connected.

2.Switch on the TV.

3.Select the appropriate external video input on your TV by using the TV remote control.

4.If the LCD is moved to a different location. You should reset the receiver and do the channel scanning all over again.

USING THE DTV ON-SCREEN DISPLAY (OSD) CONTROLS

1.Press DTV MENU on the remote control to display the MENU banner.

2.Use the ▲▼W X to navigate to different menu item.

3.Use the W X to adjust functions.

4.Press SEL on the remote control to select functions. Press RTN to jump back the last page of menu.

5.Press EXIT on the remote control to quickly exit from menu.

Channel	Enter Password		Edit, Auto Scan, Manual Scan
Caption	Font Size		Default, Small, Middle, Large
	Font Style		Default, Style0~7
	Font Color		Background, Foreground
	Font Opacity		Background, Foreground
	Edge Style		Default, None, Raised, Depressed, Uniform, Drop Shadow (L), Drop Shadow(R)
	Edge Color		Default, Gray, Blue, Red, Green, Cyan, Yellow, Dark
	Opacity		0%~100% adjustment
	I-Plate		Display Time
	Time Zone		Time Format, Time Adjustment
	About		HW & SW version
Lock	Enter Password		Rating, Password, Reset Default
		Before you can use any of the channel buttons (CH＋/－, FAV. CH, Numbers), the available channels must first
Channel
		be scanned and memorized.

Auto Scan

Initial Screen –

The first time the receiver is powered on. You will see a message block of “Press [Menu] key and then select Channel to run Auto / Manual Scan”.

1.Press the DTV MENU button to display the MENU banner.

2.Use the arrow keys W or X to move highlight CHANNEL and enter default password “0000” to show three sub-menus

3.Press ▲ or ▼ buttons to highlight the AUTO SCAN, and then press SEL to lunch the auto scan. An AUTO-SCAN window will show the SCAN status.

4.Once the digital TV signal is scanned, the channel number and program name will be shown on the “Scan List”.

5.Scanning will end up on channel 69 when it is complete (even in processing) you can press EXIT key to leave this window and enjoy watching DTV programs.

40