SETTING UP YOUR DTV
Change Password
To change password, enter the Change Password Number option in PASSWORD function and press SEL button to change password. Enter four digital password in enter new password number. And then confirm the password by entering the same password again.
NOTES: 1. Before you change the password, use the default password “0000” to enter the Menu item which requires the password.
2.If you forget the password, please use the password “1234” to enter.
3.To enter the new password, and follow the instruction.
Reset Default | This function allows to reset receiver back to factory default status. |
|
|
. Press ▲▼ buttons to highlight t
1.Press ▲▼ buttons to highlight the “Reset Default”, and then press SEL to into the rating control menu.
2.There will pop up the RESET confirmation message “Press Yes will reset default to default value”. Press SEL on “Yes” to process. Press SEL on “NO” to cancel the setting.
CLOSED CAPTION
English
1.When you learn from the
2.Use ▲ and ▼ buttons to highlight the desired CC signal and press SEL button.
3.After the type of Closed Caption has been selected, press EXIT or CC buttons to cancel the CC Option list, then you can watch this Digital TV program with Closed Caption.
FAVORITE CHANNEL LIST
1. When you are watching terrestrial or cable TV channels, you can press “FAV” button on the remote control to call up the Favorite List.
2. Use W and X buttons to navigate “ALL”, “Fav1”, and “Res” program lists.
3. Use ▲ and ▼ buttons to browse through the selected program lists and highlight the program you like to watch, then press SEL button.
NOTE: Press Numeric Key to Select Digital Channel
For the digital channel number is different with the traditional NTSC channel number. Please follow below indication to select the digital channel if you prefer using numeric key doing the channel selection.
Example: digital channel number: 10 - 2
1.Press numeric key “1” and “0”
2.Press “X“button
3.Press numeric key “2”
43