MENU OPERATION
How to use the On-Screen Display (OSD) system
With the
•Basic Operation
1.Press 
button on the remote control or Menu button on the control panel of the unit. The Main Menu is displayed on the screen as shown on the right.
2.To select the item, press Ÿ or ź buttons.
The selected item will be highlighted in Green.
3.Press OK button to set your selection.
The selected menu page will be displayed on the screen.
4.Use Ÿ or ź buttons to choose the item on the MENU page. Press OK button to set your selection.
5.Use Wor X buttons to adjust the item values or choose options. Press OK button to set your selection.
6.To exit from the menu, press 
button.
NOTE
The OSD menu screen will be closed automatically when no operation has been made for about 30 seconds.
Picture
Audio
Timer
Setup
Language
Select
OK Set
<Main Menu>
MENU
Button
MENU button
Language Menu
Select the language from the list so that you can display the OSD menu in the selected language.
How to set Language
1.Enter the “Language” menu from the Main Menu.
2.Select the appropriate language with Ÿ or ź button from the list. The selected item will be highlighted in Green.
3.Press OK button to set your selection.
The white dot is marked inside of the circle when the selection is fixed.
4.Press 
button to exit from the entire OSD menu.
Language
English
| |
| |
Pycckɢɣ |
|
Select OK Set | Return |
22
Downloaded From