Hitachi 32LD9000TA, 26LD9000TA Troubleshooting, When Following Messages Appear on the Screen

TROUBLESHOOTING

Before calling service technician, check the following tables first. If the problem is not be solved with the suggested procedures, contact your local dealer. For your safety, NEVER try to repair the product by yourself.

When Following Messages Appear on the Screen

Message		Condition / Action	Page
Power Save	This indicates it is in Power Save mode. (in RGB mode)		19 , 35
	The indicating lamp lights in orange.
	The unit cannot detect any signals from any input terminals.
No Sync. Signal	z Check if the cable is connected correctly and firmly.		14 ~ 19
	z Check if the power of the external equipments is ON.
	z Check if the input selection matches the connection terminal.
	z Check if the PC is in Power Save mode or not.
Auto Adjust	This indicates that it is in the process of auto adjusting.		25
	(in RGB mode)
Symptom and Check List
Symptoms		Check list	Page
		z Check the Indicating lamp status (Off, Red, Green, or Orange).	14 ~ 18
		z Check the connection of the Power Cord and/or other cables.
No picture – no sound		z Check if the Main Power of the unit or external equipments is ON.	19 , 23
		z Check if the TV mode is selected.
		z Check if the TV is in “Standby mode” or “Power Save mode”.	35
		z Adjust the values in “Picture menu” and “Audio menu”.
		z Check the aerial connection and direction.
Snowy picture-poor sound		z The TV station may have broadcast difficulties.	14
		z Try another channel.
		z Check the aerial connection and direction.
Multiple images-normal sound		z Fine tuning the TV.	14 , 23
		z Check the connection of the external equipments.
		z The TV station may have broadcast difficulties. Try another channel.
Intermittent interference		z Check if the source of interference is shielded well.
		z Remove those kinds of electrical devices away from the TV.
		z Check the volume level.

Normal picture, but no sound z Check if the button has been press or not. 20

zMake sure that the headphone is NOT connected.

zCheck the connection of the external equipments.

No picture – normal sound	z Check the volume level of “Brightness” and “Contrast” in “Picture Menu”.	26 , 28
	z Check if the batteries are installed correctly.
The remote control does not work.	z The batteries might be exhausted. Replace them with new ones.	11 , 12
	z Remove all the obstructions in front of the sensor window on the unit.
	z Check if the buttons of the control panel can work.
Normal picture but no color-normal sound	z Check the connection of the external equipments.	14 ~ 18
	z Check the “Color” in “Picture Menu”.	26

36

Downloaded From TV-Manual.com Manuals