Hitachi LE32H405 To connect the TV to a camcorder, or a game console, To return to normal mode

Connections to other equipment (continued)

To connect the TV to a camcorder, or a game console

To play back from a camcorder, connect the camcorder to the unit as shown.

This unit can also be used as a display device for many video games. However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.

Back of the unit

iVIDEO A_L_ _R ! TO VIDEO/AUDIO IN

111

To Video/Audio OUT

Video/Audio cable (not supplied)

_:_orIGAMECONSOLE!

To connect the TV to a PC (Personal Computer)

Connect one end of a (mate to male) VGA cable on the rear of the TV. Attach the connectors firmly

to the video card of the computer and the other end to the VGA connector RGB Input with the screws on the plug. In case of a Multimedia computer, connect the audio

cable to the audio output of your Multimedia computer and to the AUDIO connector of the RGB/DVI AUDIO Input jack of the TV. You

can also connect the PC with HDMI cable. If you use a HDMI cable, you don'thave to connect the audio cable. If you use a DVI-to- HDMI cable, please connect the audio cable in the same way as the RGB cable.

Press INPUT on the remote control to select RGB mode.

Switch on the computer. The TV can operate as the computer monitor.

Left and Rear of the unit
•					Monitor	Display modes
AUDIO Input r--" RGB	I				MODE	Resolution	Refresh rate
	/
				PC	VGA	640x480	60	Hz
					SVGA	800x600	60	Hz
					XGA	1024x768	60	Hz
to					WXGA	1280x768	60	Hz
	VGA				WXGA	1280x720	60	Hz
			ca,nsuut,e ,ied,i
					WXGA	1360x768	60	Hz
					To return to normal mode
		cable		(not supplied)	Press INPUT again.
	Audio cord		(not	supplied)

le on-screen displays will have a different appearance in RGB mode than in TV mode.

• If there is no video signal from the PC when the unit is in RGB mode, "No signal" will appear on the TV screen.

21