Hitachi 60V710, 50V715, 50V710, 42V715, 60V715 important safety instructions Aspect button, Standard

HOW TO USE THE REMOTE TO

CONTROL YOUR LCD REAR PTV

fASPECT button

Press this button to quickly change the picture format ASPECT ratio.

Depending on the input signal format received, the picture format ratio allows you to adjust the images through the following options.

4:3	STANDARD	Use this aspect mode to display conventional (4:3) images. Side panels (gray areas) are placed to the
		left and right of the image to preserve the original aspect ratio of the source. Note: Use this mode for
		only 15% of your total viewing time to prevent uneven aging of the phosphors. Phosphors in the lighted
		area of the picture will age more rapidly than the gray areas.
4:3	EXPANDED	Use this aspect mode to display conventional (4:3) sources by linearly increasing image expansion from
		the center towards the edges of the display area in order to fill it.
4:3	Zoom1/Zoom2	Use these aspect modes to zoom in on conventional (4:3) sources.
16:9 STANDARD		Use this aspect mode to display 16:9 sources like HDTV and DVD’s preserving the original 16:9 aspect
		ratio.
16:9 Zoom		Use this aspect to Zoom-in once while in 16:9 aspect.

(1)NTSC/480i/480P Input

4:3
INPUT	4:3 STANDARD	4:3 EXPANDED	4:3 ZOOM1
	16:9 ZOOM	16:9 STANDARD	4:3 ZOOM2

(2)480i/480P Input

16:9
INPUT	4:3 STANDARD	4:3 EXPANDED	4:3 ZOOM1
	16:9 ZOOM	16:9 STANDARD	4:3 ZOOM2

THE REMOTE CONTROL

(3)HDMI/720P/1080i Input

16:9

INPUT 16:9 STANDARD 16:9 ZOOM 4:3 EXPANDED

NOTES: 1. The Aspect Style setting you select for an ANT input will automatically be set for the other ANT inputs. However, all five video inputs have independent Aspect Style settings.

2.Vertical position adjustments are directly available when you choose 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9 ZOOM aspect style (see also page 51).

23

Downloaded from www.Manualslib.com manuals search engine