Hitachi 42PD8800TA Input Level, Frequency Display, Wvga Type, Wxga Mode, Vertical Filter

42PD8800TA 55PD8800TA

MENU OPERATION (continued)

Setup Menu (RGB mode) (continued)

Selected Items		Setup hint
	0.7V	Normally, select [0.7V].
Input Level		Select [1.0V] only when the whole display becomes too
	1.0V	white.
	Off	Select whether indicating the PC signal frequency infor-
Frequency Display
	On	mation on Input Signal Screen Display or not.
	Off	It allows you to switch display size to [Full] and [Real]. (See
WVGA Type		“Size Switching” on 39 for the details.)
		This function is available only for WVGA signal.
	On	Refer to “Recommended Signal List” on 59 .
	Off	This function is available only for WXGA signal.
WXGA Mode	1280x768
		Refer to “Recommended Signal List” on 59 .
	1366x768
Vertical Filter	Off	Reduce the fl ickers on the screen when set to [On].
	On
Frequency Mode	PC	Select [Movie] when you see the moving image on PC.
	Movie

Information

The items indicated by “*” can be automatically stored the setting depending on the signal mode.

The signal mode is identified by the Horizontal/Vertical frequency and the sync. signal polarity, which has almost same values in all the above items might be regarded as the same signal.

The item “Auto Adjust” cannot be stored. Press OK to start auto adjustment as needed.

26

HITACHI

ENGLISH

PW3-12th-P25-P39.indd 26 2005/11/08 15:28:04