Hitachi P50S602 Side Panel Jacks & Controls, INPUT-3 Side Jacks, HDMI-3, Upgrade Card

Side Panel Jacks & Controls

i

u

y

CHt

CURSOR

+

VOL_ r

INPUT/ EXIT

	e	a R/C and
MENU
/ SELECT	w	Ambient
		Light Sensor

POWER

q

FRONT VIEW

o Indicating Lamp

FIRST TIME USE

POWER switch

This power switch is for the complete system. It is recommended to leave this POWER switch to ON condition (lights red) for stand-by mode.

MENU/SELECT button

This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This button also serves as the SELECT button when in MENU mode.

INPUT/EXIT button

Press this button to access the INPUT menu. This button also serves as EXIT button when in MENU mode.

VOLUME level

Press these buttons to adjust the sound level. The volume level will be displayed on the TV screen. These buttons also serve as the cursor left () and right () buttons when in MENU mode.

CHANNEL selector

Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as the cursor down () and up () buttons when in MENU mode.

INPUT-3 (SIDE) JACKS

INPUT-3 provide composite Video and S-Video jacks for connecting equipment with this capability, such as a DVD player, Game Console or Camcorders.

HDMI-3

Use this side HDMI input for AV Equipment such as Set-Top-Boxes or DVD players equipped with an HDMI output connection (see page 14 for reference).

UPGRADE CARD

This card slot is for future software upgrades. Hitachi will notify you if a software upgrade is required for your TV.

In order to receive written notification, please complete and return your warranty card.

POWER light indicator

To turn the TV ON, press the Power switch (). A red stand-by indicator lamp located on the lower left corner of the front bezel will illuminate. The Plasma TV is now ready for remote ON/OFF operation.

Indicating	Power Status	Operating
Lamp
Off	OFF	When the POWER switch
		is set to OFF.
Lights	OFF	When the POWER switch
Red	(Stand-by)	is set to ON.
Lights	ON	TV Power is ON;
Blue		picture is shown.
Lights	OFF	TV Power is ON with
Orange	(Power	no signal input except
	Saving)	antenna (no sync. signal)
Blinking	ON	When TV receives the IR
Blue		signal from the RC.

REMOTE CONTROL and AMBIENT LIGHT sensor Point your remote at this area when selecting channels, adjusting volume, etc. This area also detects ambient light level for automatically brightness control of the screen.

NOTES • Your HITACHI Plasma TV will appear to be turned OFF (lights orange) if there is no video input when INPUT 1, 2, 3, or HDMI 1, 2, 3 is selected. Check the Power Light to make sure the TV is turned off or in Stand-by mode (lights red) when not in use.

•Remote Control cannot turn ON/OFF the TV when

Power Switch is set to OFF.

•If Power Light Indicator Brightness is set to OFF, the indicating lamp will not light when the TV turns ON. Please refer to page 41.

•Please do not put anything around R/C and Ambient light sensor, as its function will be affected.

9