Hitachi P50S602 important safety instructions TV Setup Wizard, First

TV Setup Wizard

This television has a TV Guide On ScreenTM feature which has the ability to show you a customized list of the programs on a daily basis and channels available in your area. The information for the guide is broadcast on different channels in different areas.

Please use this TV Setup Wizard to help TV Guide On ScreenTM find the channels available in your area.

FIRST

The First time you turn on your Hitachi Plasma TV the Energy Savings Initial Settings screen will appear. Please select either HOME or RETAIL mode settings to advance to the TV Setup Wizard screen. If you select HOME mode this will save energy and is intended for home use. RETAIL mode will set the Picture to Dynamic default Settings and the picture will be brighter. This setting is intended for showroom and shop use. If later you want to change the Energy Savings Initial Settings you can using the Setup Menu (refer to page 41).

Energy Savings Initial Settings

Please Select HOME or RETAIL

HOME RETAIL

HOME mode meets Energy Star™ guidelines and is best for home use.

RETAIL mode uses more energy and is intended for in-store display.

the TV Guide On ScreenTM Setup screen will appear (refer to page 33).

2.Press the q CURSOR to move to the next window to select the source.

Source:t Air u Please connect the antenna or cable to the input labeled “Air/Cable”.

3.Press the u CURSOR to select Air, Cable(1) or Cable(2).

4.Press the q CURSOR to move to the next window to start the Auto Channel Scan.

Auto Channel Scan : Start

5.Press the SELECT button on the remote control to begin scanning.

TIME USE

Move SEL Select

NOTE RETAIL Mode is intended for showroom or shop use only, if you make adjustment changes in this mode they will not be saved when the TV is turned Off.

The TV Setup Wizard screen automatically starts after the Energy Savings Initial Settings Screen the first time the TV is turned on.

NOTES	• If you see the screen above when you turn on your
	TV for the first time and did not yet connect your
	external devices and cables to your TV, turn off
	your TV, unplug the power cord and connect your
	devices and cables according to the applicable
	connections in the “First Time Use” section of this
	Operating Guide.

•After completing the TV Setup Wizard, these screens will not appear again. For updating and adding the channels available in your area refer to the Auto Channel Scan feature on page 34.

When the TV Setup Wizard appears on-screen, start by selecting Yes or No in the top portion of the TV Setup Wizard.

1.Use the t and u CURSOR to select Yes or No and press the SELECT button on the remote control.

Do you want the TV to find all of the channels for the TV Guide On ScreenTM?

Yes No

If Yes is selected proceed to step 2.

If No is selected, press the EXIT button on the remote control and

Air

Scanning Channel Number : 12

Analog Digital 12-123

Scan time may take 10 to 20 minutes

Cancel

When Auto Channel Scan is done the TV Guide On ScreenTM Setup screen as shown below will appear (refer to page 33).

13