| Changing |
| Calling Up a Room | Video and Audio | Adjusting | Displaying the |
| Adjusting the Tone | Timing | ||||
| Surround Sound | Sound Setting | Surround Effects | Data Screen | ||
|
| Compensations | ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
Changing Each Channel’s Output Level
1- 3 (Same as steps 1 - 3 on P27, “Test Signal”) The following screen appears:
Surround Setup |
| |
1 | Left | 0.0dB |
2 | Right | 0.0dB |
3 | Surround L | 0.0dB |
4 | Surround R | 0.0dB |
5 | Center | 0.0dB |
6 | Aux Center | Mute |
7 | Bass Management | |
8 | Noise Source | off |
Front left channel
Front right channel
Rear left channel
Rear right channel
Center channel
4Using the buttons, select the desired channel, then press the ENTER button. The following screen appears:
Left
to edit
Press ENTER or MENU to exit
Level
0.0dB
5Using the buttons, adjust the output level as desired, then press the ENTER button. Adjust the output level while listening to the test signal.
Setting range: 0.0 dB – 12.0 dB
Note:
When you’re finished, you can press the MENU button repeatedly to return to previous screens.
Adjusting the Sound
29
