| Changing |
| Calling Up a Room | Video and Audio | Adjusting | Displaying the |
| Adjusting the Tone | Timing | ||||
| Surround Sound | Sound Setting | Surround Effects | Data Screen | ||
|
| Compensations | ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
Caution:
When adjusting the digital sound projector’s sound, the menu screen is displayed on the connected television monitor. To see the display, turn on the television’s power and set the television’s video input to the digital sound projector.
Note:
When adjusting the digital sound projector’s sound, use the following buttons (hard keys) of the remote control unit:
Button | Name | Function |
| MENU | Open/Close the menu screen |
| Move cursor / select items and numbers | |
| ENTER | Finalize settings |
Changing Surround Sound 
You can adjust each channel’s volume/balance while listening to the actual sound, as well as adjusting the sub- woofer and other options.
Test Signal 
A test signal can be used to adjust the output level of each channel.
1Use the touch panel to select the
PDSP menu.
From the HOME menu, press 
; from other menus, press 
.
2Press the MENU button.
The following “System Setup” menu appears.
System Setup
1 Surround Setup
2All Ch Tone Control
3Recall Memory
4Lipsync delay
5Stereo Mode
Adjusting the Sound
“Digital sound projector menu screens don’t appear” P38
“Changing Each Channel’s Output Level” P29
27
