Pioneer PDSP-1 manual Left, Right, Surround L, Surround R, Aux Center Mute

Changing		Calling Up a Room	Video and Audio	Adjusting	Displaying the
	Adjusting the Tone		Timing
Surround Sound		Sound Setting		Surround Effects	Data Screen
			Compensations

3Using the ￿￿￿￿ buttons, select “Surround Setup”, and press the ENTER button. The following screen appears:

Surround Setup			Front left channel
1	Left	0.0dB	Front right channel
2	Right	0.0dB
3	Surround L	0.0dB	Rear left channel
4	Surround R	0.0dB	Rear right channel
5	Center	0.0dB
6	Aux Center	Mute	Center channel
7	Bass Management
8	Noise Source	off

Note:

“Aux Center” is an additional center channel. To use the “Aux Center” channel, a special dedicated setting is required; consult your installation service personnel.

4Using the ￿￿￿￿ buttons, select “Noise Source”, and press the ENTER button. The following screen appears:

Noise Source

1 Off

2Left

3Right

4Surround L

5Surround R

6Center

7Aux Center

8LFE

5Using the ￿￿￿￿ buttons, select the channel, and press the ENTER button. The test signal will be produced from the selected channel.

“Sub Woofer / Bass Management” ￿ P30

28