![](/images/new-backgrounds/1175244/17524459x1.webp)
| Changing |
| Calling Up a Room | Video and Audio | Adjusting | Displaying the |
| Adjusting the Tone | Timing | ||||
| Surround Sound | Sound Setting | Surround Effects | Data Screen | ||
|
| Compensations | ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
Sub Woofer / Bass Management
This menu allows you to set the unit for a
1- 3 (Same as steps 1 - 3 on P27, “Test Signal”)
4Using the buttons, select “Bass Management”, and press the ENTER button. The following screen appears:
Bass Management |
| |
1 | Sub Woofer | Yes |
2 | LFE Level | 0.0dB |
LFE channel output level
Notes:
LFE means “Low Frequency Effect”.
If “Sub Woofer” is set to “Yes”, use the buttons to select “LFE level”, then use the buttons to adjust the output level.
Setting range: 0.0 dB – 12.0 dB
5Using the buttons, select “Sub Woofer”, then press the ENTER button. The following screen appears:
Sub Woofer: No
(LFE will not be output from any channel)
Sub Woofer Menu
1No
2No/LFE to panel
3Yes
Sub Woofer: No/LFE to panel
(LFE is output from digital sound projector)
Sub Woofer: Yes
(LFE is output to Sub Woofer)
6Using the buttons, select either “No,” “No/LFE to panel,” or “Yes,” then press the ENTER button.
Note:
When you’re finished, you can press the MENU button repeatedly to return to previous screens.
“SUB WOOFER OUTPUT connectors” P13
30