Displaying the Data Screen, Width | Pioneer PDSP-1 specification

Changing		Calling Up a Room	Video and Audio	Adjusting	Displaying the
	Adjusting the Tone		Timing
Surround Sound		Sound Setting		Surround Effects	Data Screen
			Compensations

Displaying the Data Screen

Use this function to confirm information about the currently playing audio and video source, and room sound settings.

1Use the touch panel to select the PDSP menu.

From the HOME menu press ; from other menus, press .

2Press the ENTER button.

The “Status” menu screen appears as shown below.

Status
Source	Input 2 D
Memory	1
Mode	PLII Movie
Width	1.00

Item	Contents	Display Example
Source	Input/Signal type	Input 1-5, 2D (digital), 2A (analog)
Memory	Preset sound setting	1-8, * (when a change has occurred to the called-
		up sound setting)
Mode	Audio mode type	PLII Movie, PLII Music, Pro Logic, Stereo, Mono
Width	Image width setting	0.00-1.00 (image width setting value), Off

3After confirming the data, press the ENTER button. The “Status” menu screen disappears.

Adjusting the Sound

“INPUT 1 – 5 connectors” P13

“Selecting the Audio Mode” (Dolby Pro Logic II) P25

“Calling Up a Room Sound Setting” (Memory 1-8) P32

“Adjusting Surround Effects” (Image width) P34

37

Image 37

Pioneer PDSP-1 manual Displaying the Data Screen, Status Source Input 2 D Memory Mode, Width, Press the Enter button

Contents

PDSP-1 Installation For U.S. model Preface Regarding Installation Maintenance of External Surfaces Contents Beam control technology Features Sound settings to match your room’s characteristics These operating Instructions Confirm All Accessories Audio Section Specifications Front Panel Parts and their Functions Range of the Remote Control UnitAttaching the Front Grille Rear Panel Audio output Output Optical connector About the Input/Output ConnectorsVideo outputs Monitor Output connectors SUB Woofer Output connectors About the Remote Control Unit Buttons hard keys Remote Control Unit Set the touch panel to the Home menu Setting the Basic Information on the Remote Control Unit Illustration depicts U.S. model Using Digital Sound Projector Using the Remote Control UnitComponent Operation Menu Display About the Home Menu About the Pdsp digital sound projector menu Operating Menus for Other Components Watching Television Using Accompanying three menus are used to operate the DVD player Watching a DVD Recording Using a Pioneer DVD RecorderPerform recording operations on menu 1/2 at left Following four menus are used to operate the DVD recorder Playback/Editing Using Selecting the Audio ModeDigital Sound Pr ojector Plii Movie Plii Music Pro Logic Stereo Enhancing Monaural Sources Mono Test Signal Adjusting the SoundChanging Surround Sound Use the touch panel to select the Pdsp menu Right LeftSurround L Surround R Aux Center Mute Bass Management Noise Source Off Surround Setup LeftLeft To edit Press Enter or Menu to exit Level 0dB Changing Each Channel’s Output Level Bass Management Sub Woofer Yes LFE Level Same as steps 1 3 on P27, Test SignalSub Woofer Menu No/LFE to panel Yes Sub Woofer / Bass Management All Ch Tone Control Bass Level 0dB Adjusting the ToneTreble Level 0dB All Ch To edit Press Enter or Menu to exit 0dB Bass + Recall from Memory Calling Up a Room Sound Setting Lipsync delay To edit Press Enter or Menu to exit Delay 0ms Video and Audio Timing Compensations Lipsync delay Stereo Mode Menu Image width Image width value Plii Mode Adjusting Surround Effects Fine Tuning the Plii Music Mode Plii Mode Plii Off Movie Music Pro Logic Panorama Off Center width Dimension Stereo Mode Menu Image width Displaying the Data Screen Status Source Input 2 D Memory ModeWidth Press the Enter button Troubleshooting Additional Information Table of Remote Control Unit Menu Displays Dvdplayer Channel Menu Enter VOLUME,MUTE Terms displayed in menus Terms on front panel / rear panel Index Terminology in these operating instructions Symbols and terms on remote control unit / touch panel 03F00001