Troubleshooting | Table of Remote Control Unit Menu | Index | |
Displays | |||
|
| ||
|
|
|
Troubleshooting
Many malfunctions can be the result of operating errors. If you experience trouble with the digital sound projector, use this troubleshooting guide together with thorough checks of the other components in your system. If the problem is not corrected after doing so, consult your authorized service center.
Sound
Problems?
?
No sound
Use the remote control unit’s PDSP menu to check INPUTs | P19 |
confirm you have selected the correct input. | P10 |
Check the front panel VOLUME LEVEL indicator to confirm whether the | |
MUTE button has been pressed, or if the sound volume has been set to its |
|
minimum setting. | P10 |
Confirm that the digital sound projector’s main power is turned ON and | |
that the front panel’s POWER ON indicator (Blue) is lighted. |
|
Sound has a poor surround effect | P26 |
Confirm whether the audio mode has been set to “Mono” for monaural |
sound.
Confirm whether the audio mode has been set to “Stereo” for stereo sound. P25
Check the playback source to confirm that it is a
Sound has poor balance
Confirm that the proper room sound setting has been chosen. | P32 |
If the digital sound projector has been physically moved, or if the furniture in the room been significantly rearranged or changed, consult your installation technician to have the digital sound projector recalibrated for the new room environment.
No sound from the connected
Confirm whether the | P30 |
Recording isn’t possible on the connected components
If the playback source is a digital signal, it may be protected with a copyguard function, in which case it cannot be recorded. In this case, use an analog connection between the playback component and recording component, and record the source in analog mode.
Video
Problems?
?
Digital sound projector menu screens don’t appear
Confirm that the proper video input has been selected on the television monitor.
No image is visible on the connected TV monitor.
Confirm that the proper video input has been selected on the television monitor.
38
