Watching a DVD | Pioneer PDSP-1 specification

	Using the Remote	Watching Television	Watching a DVD	Using a Pioneer DVD	Selecting the Audio
	Control Unit	Watching Television	Watching a DVD	Recorder	Mode
	Control Unit			Recorder	Mode

Watching a DVD

Use this menu to operate a connected DVD player.

1

Turn on the power to the digital sound projector.

2

Turn on the power to the television monitor.

3

Set television input to digital sound projector.

4 – ,

Select the input connected to the DVD player.

5

Change to DVD player operating menu.

6The accompanying three menus are used to operate the DVD player.

Use the arrows on the touch panel to change between the menu screens.

DVD Player Operating Menus (3 screens)

1/3	2/3	3/3
1/3	2/3	3/3

Notes:

If a Pioneer DVD player is connected, the DVD player’s power will turn on in step

If is pressed in step 1 , the DVD player operating menus shown in step 6 possible to operate the DVD player without using the digital sound projector.

5.

will appear, and it will be

“INPUT 1 – 5 connectors” P13

22

Image 22

Pioneer PDSP-1 manual Watching a DVD, Accompanying three menus are used to operate the DVD player

Contents

PDSP-1 Installation Preface For U.S. model Maintenance of External Surfaces Regarding Installation Contents Features Beam control technology Sound settings to match your room’s characteristics Confirm All Accessories These operating Instructions Specifications Audio Section Front Panel Parts and their Functions Range of the Remote Control UnitAttaching the Front Grille Rear Panel Video outputs Monitor Output connectors About the Input/Output ConnectorsAudio output Output Optical connector SUB Woofer Output connectors Remote Control Unit About the Remote Control Unit Buttons hard keys Setting the Basic Information on the Remote Control Unit Set the touch panel to the Home menu Illustration depicts U.S. model Using Digital Sound Projector Using the Remote Control UnitComponent Operation Menu Display About the Home Menu About the Pdsp digital sound projector menu Operating Menus for Other Components Using Watching Television Watching a DVD Accompanying three menus are used to operate the DVD player Recording Using a Pioneer DVD RecorderPerform recording operations on menu 1/2 at left Playback/Editing Following four menus are used to operate the DVD recorder Digital Sound Pr ojector Selecting the Audio ModeUsing Plii Movie Plii Music Pro Logic Stereo Mono Enhancing Monaural Sources Changing Surround Sound Adjusting the SoundTest Signal Use the touch panel to select the Pdsp menu Surround L LeftRight Surround R Left To edit Press Enter or Menu to exit Level 0dB Surround Setup LeftAux Center Mute Bass Management Noise Source Off Changing Each Channel’s Output Level Sub Woofer Menu No/LFE to panel Yes Same as steps 1 3 on P27, Test SignalBass Management Sub Woofer Yes LFE Level Sub Woofer / Bass Management Treble Level 0dB Adjusting the ToneAll Ch Tone Control Bass Level 0dB All Ch To edit Press Enter or Menu to exit 0dB Bass + Calling Up a Room Sound Setting Recall from Memory Video and Audio Timing Compensations Lipsync delay Lipsync delay To edit Press Enter or Menu to exit Delay 0ms Adjusting Surround Effects Stereo Mode Menu Image width Image width value Plii Mode Plii Mode Plii Off Movie Music Pro Logic Fine Tuning the Plii Music Mode Stereo Mode Menu Image width Panorama Off Center width Dimension Width Status Source Input 2 D Memory ModeDisplaying the Data Screen Press the Enter button Troubleshooting Additional Information Table of Remote Control Unit Menu Displays Dvdplayer Channel Menu Enter VOLUME,MUTE Index Terms displayed in menus Terms on front panel / rear panel Symbols and terms on remote control unit / touch panel Terminology in these operating instructions 03F00001