Hitachi L32BD304 manual Setup Menu options, Icon Option Description

Setup Menu options

Icon	Option	Description
	BD-Live Internet	Sets the Internet access level.
	Access
	BD-Live Storage	Selects a USB drive to store BD-Live content.
	Erase Blu-ray	Clears the non-volatile storage (application data area) on a Blu-ray Disc. The application data area is the
	Storage	space on a Blu-ray Disc that stores information such as the subtitle language selection.		ENGLISH
		When you select this option, a confirmation box will appear. If you select “Ok”, unit erases the Blu-ray Disc
System		application data area. (Press A or ENTER to select Erase Blu-ray Storage, Update Via Network and Restore
		factory defaults options.)
	Update Via Network	Updates the BD player’s software via the Internet. Check if the unit is connected to the Internet properly, then
		select “Update Via Network” from the Setup Menu. When there is new software available on the software
		update server, the “Automatic Upgrades Over the Internet” screen will appear.
		Select “Ok”, then press ENTER. Downloading will start automatically and a progress bar will appear on
		screen. Once the update is complete, the unit will automatically turn off and on.
	Restore factory	• Restore factory setting—Resets all settings to factory default.
	defaults	•	Deactivate Pandora—Resets Pandora settings.
	Wired	•	Link Status—Indicates whether or not the BD player is currently able to access an Internet site. Useful
			when confirming the unit is properly connected to a network; “Link Up” is displayed if properly connected
			and “Link down” if not.
		• MAC Address—Shows unit’s MAC address.
Network		• IP Mode—Selects the IP configuration mode. Select Dynamic (uses DHCP to automatically obtain an
			IP address), Manual (let you manually configure network settings, such as IP Address, Subnet Mask,
			Gateway, Primary DNS and Secondary DNS settings), or Off (disables the network interface).
			* The network cannot be connected to the Internet by way of a proxy server.
	Network Test	Press ENTER to select this option. It tests unit’s Internet connection by “pinging” an IP address. A “ping” sends
		a message to an Internet address and waits for a reply to verify that a connection is working.
	BD/DVD Output	Selects the picture size, so you can match the size of the TV screen.You can select “16:9 Wide” or “16:9
		Pillarbox”.
Display		Note: For a wide-screen TV, select one of the 16:9 aspect ratios. If you select an aspect ratio that does not match
		your TV’s screen size, the resulting picture display may be unpredictable.
		• This setting applies to Blu-ray mode only. It changes the aspect ratio for a disc recorded at in a 4:3 format,
			but does not change the aspect ratio for a disc recorded in a 16:9 format.
	Digital Output	Selects the digital audio output. The option you select depends on the capabilities of the sound system you
		have connected to unit.
		•	PCM Stereo—Sends mixed digital audio over SPDIF in two-channel PCM format.
		•	Bitstream—Sends the original bitstream from disc over SPDIF using legacy audio formats. Blu-ray Disc
		•	audio is limited to the soundtrack for main movie and does not send PIP audio or audio effects.
			Bitstream Mixed—Blu-ray Disc audio streams are mixed and encoded into a single bitstream. Use
			this option if you are using an SPDIF 5.1CH receiver and you want to enjoy mixed Blu-ray Disc audio in
			surround sound.
Audio		Note: When “Bitstream” is selected, unit cannot output secondary audio.
	Dynamic Range	Sets Dynamic Range Control to “On” or “Off”.
	Control	Dynamic Range Control is only active when a Dolby Digital signal is received. When you turn on this option
		and movie soundtracks are played at low volume or from smaller speakers, unit applies compression to make
		low-level audio more intelligible and prevents loud audio from getting too loud.
		• On—Select this option if you play movies at low volume or if you have small speakers. Unit uses
			compression to make low-audio content easier to hear and prevent high-audio content from getting too
			loud.
		• Off—Select this option if you do not want to use the DRC feature. The DRC gain value is ignored, and the
			audio program is reproduced with full dynamic range.
	OSD	Selects the Setup Menu language.You can select “English”, “Français”, or “Español”.
Language	Menu	Selects the menu language for the disc.
	Audio	Selects the audio language for the disc.
	Subtitle	Selects the subtitle language for the disc.
	Parental Country
Parental	Parental Control	See page 30.
	Parental Level
	Parental Password

29