Hitachi L32BD304 manual Symptoms Possible Solutions, DVD/Blu-ray Disc, Remote Control, Slot

Problems and troubleshooting					(continued)
SYMPTOMS				POSSIBLE SOLUTIONS		PAGE
PC
When a letter string is displayed in full-		•	Check “Auto Adjust”.
screen, all of the characters on the screen						18
		•	If the condition is not improved with “Auto Adjust”, check “Phase” until you get the clearest image.
are blurred.
When small patterns are displayed on the		•	Check “Auto Adjust”.			18
screen, the entire screen is flickering.		•	If the condition is not improved with “Auto Adjust”, check “Phase” until you get a flicker-free display.
Image cannot be displayed in the correct		•	Check the signal status of the PC.			–
position.
DVD/Blu-ray Disc
		• A built-in safety device may have been activated. Press POWER on the side of unit to turn it off, then turn				–
TV/Blu-ray combo does not work.			it on again. If unit still does not turn on, unplug the power cord, wait about one minute, plug it in again, then
		•	press POWER on the side of unit.			–
			Condensation may have formed inside unit. Turn off unit and wait about two to three hours for the
			condensation to evaporate.
Playback will not start, or playback starts		•	If you see	, the action you are trying is not allowed by unit or the disc.		23
		•	Make sure that the disc is inserted with the label facing forward.			23
then stops.		•	Make sure that the disc is not dirty.			7
		•	The disc may be blank or not compatible with unit.			7
No picture.		•	TV/BD selector is not set correctly.			23
No sound.		•	Check the input selector of the amplifier is set properly.			–
		•	The unit is in the Special playback mode.			23
		•	Select the correct Audio Output position on AV amplifier.			34
Startup is slow.		•	Startup may be slow if the TV is connected to the HDMI cable.			–
		•	Startup may be slow the first time you plug in the power cord or after a power failure.			–
The player is on and displays the start logo		•	Make sure that the disc is not dirty.			7
and menu, but there is no image from the
		•	Try resetting your player. Press POWER, wait five seconds, then press POWER again.			–
disc displayed.
Picture is distorted during CUE or REVIEW.		•	The picture will be distorted occasionally.			–
Stopping playback, search, slow-motion		•	Some discs may not allow these functions.			–
play, repeat play, or program play, etc.
cannot be performed.
No surround sound.		•	The setup does not match your stereo system.			33
The unit is not functioning.		•	Turn off the unit and unplug the AC power cord for several minutes, then replug it.			13
Playback does not start when the title is		•	Check the Parental setup.			30
selected.
Audio soundtrack and/or subtitle language		•	Multilingual language is not recorded on the disc.			25
is not changed when you play back a disc.
No subtitle.		• Some discs have no subtitles.				25
		•	Subtitles are cleared. Press SUBTITLE.
Angle cannot be changed.		•	Multi-angles are not recorded on the disc.			25
“Prohibited”, “	” or “This operation can’t be	•	The function is prohibited with the unit or the disc.			23
performed” appears on the screen.
BD-Live, Pandora and USB connections
		•	Make sure that the Internet connection is set up correctly.			–
Cannot connect to the Internet.		•	Test the Internet connection to make sure that it is working.			–
		•	Make sure that the BD-Live Internet Access option is not set to Prohibit Access.			31
		•	Make sure that the disc you are playing is a legal copy.			–
After connecting to the Internet, cannot		•	BD storage may be full. Try clearing storage.			–
		•	Make sure that the Internet connection is still working. Try testing the connection.			–
download a file.
		•	If you are using a USB drive, try a different drive.			–
File downloaded successfully, but playback		•	Make sure that the USB drive is a 2.0 USB drive. If the drive is a 1.1 USB drive, pausing can occur.			–
pauses.
When playing a file on a USB drive,		•	Try another USB drive.			–
playback pauses.
REMOTE CONTROL
		• Aim the remote control at the remote sensor.
The remote control does not function.		• Operate within Approx. 15 feet or reduce the light in the room.				13
		•	Clear the path of the beam.
		• The batteries are weak. Replace the batteries.
		• Check that the batteries are inserted correctly.

ENGLISH

Energency Disc Eject

Note: This procedure must be done in the order described below.

1Be sure to unplug the power cord from the AC outlet.

2Insert the tip of a flathead screwdriver (5 mm dia. or smaller) vertically into Slot 1 on the back of the TV. Push the internal lever to the right until it stops.

3Insert the tip of the screwdriver vertically into Slot 2. Push the internal lever to the right until the disc ejects.

Attention

• A flashlight may be required to see the release levers.

• Be sure to perform these steps in the order shown above, and as exhibited in the diagram, or a malfunction may occur.

• This procedure is for emergency use only. Performing these steps on a normal operating unit may cause the TV to malfunction.

• Please call the service center if Disc does not eject.

Rear of the unit

2

3

Slot 1

Slot 2

37