Hitachi 26LD8000TA user manual Rear Panel Main Power Switch & Jacks, ① Main Power button

REAR PANEL MAIN POWER SWITCH & JACKS

①MAIN POWER button

This power button is for the complete system, and must be turned ON/OFF manually. It is recommended to leave the “MAIN

POWER” to ON condition (lights red) for stand-by mode.

NOTE: It is required that there should be at least 5 seconds between MAIN POWER button off than on.

②ANTENNA Input

Antenna input that connects to the antenna, cable box, or CATV cable. Supports NTSC/PAL/SECAM television system.

③VIDEO1 Inputs

Provide Y-PBPRjacks for connecting equipment with this capability, such as a DVD player or Set Top Box.

④VIDOE1 Audio Input

Connect audio for Y-PBPRinput (if you have mono sound, insert the audio cable into the left(L) audio jack).

⑤VIDEO2 Inputs

Provide Y-PBPRjacks for connecting equipment with this capability, such as a DVD player or Set Top Box.

⑥VIDOE2 Audio Input

Connect audio for Y-PBPRinput (if you have mono sound, insert the audio cable into the left(L) audio jack).

14