Remote Control of the TV

Programming the remote control for the TV

1Turn off the TV.

2Program the remote control.

Aim the DVD’s remote control at your TV set. Hold down the TV POWER button while you press the number corre- sponding to your brand of television as shown in the chart.

For example; If you have a Hitachi television, press the TV

POWER and 1 at the same time. If this button combination sends a signal that matches with your TV, the TV will turn on, and you’ll know the remote is set to control the television.

Controlling the TV

Once programmed, the DVD’s remote control is ready to control the TV.

NOTES:

•Be aware that not all of your TV’s functions may work even though the remote control is correctly programmed.

To operate the TV

•You can turn on your TV by pressing the TV POWER button.

•You can change the channels with the TV CH

(p/o) and the volumes with VOL ( / ) .

NOTES:

•If that button combination does not change the TV channel, go through the whole list of button combina- tions one by one until you find one that does change your TV channel.

•Also, if your brand of TV is not listed in the chart, try all

•If the TV channel still doesn’t change after going through all the button combinations listed, it is likely that you will not be able to program this remote control for your TV.

To operate the DVD/VCR

Press the VIDEO/TV to operate your DVD with the remote.

NOTES:

VIDEO/TV button is not corresponded to TV which can switch to TV input mode directly.

TV Brands	Press the TV and This Number

HITACHI	1

SONY	2

RCA	3

SANYO	4
ZENITH	5
PANASONIC1	6
PANASONIC2	7
SHARP1	8

SHARP2	9

TOSHIBA	0

JVC	CLEAR

MITUBISHI	+10

MAGNAVOX	SUBTITLE

FUNAI	AUDIO
GOLDSTAR	DISPLAY

– 10 –