Hitachi DVP735U instruction manual Connecting to a Dolby Digital decoder

HOOK UPS

NOTES:

•Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.

•Be sure to turn off the power to all components in the system before connecting another component.

•Refer to the Owner's Manuals for your TV, stereo system and any other components to be connected to the DVD player.

Connecting to an Amplifier Equipped with Digital Input Jacks such as MD deck or DAT deck

Use an audio coaxial digital cables (commercially available) for the audio connections. Connecting to an amplifier equipped with digital input jacks such as MD Deck or Dat Deck.

Amplifier equipped with digital

input jacks, MD deck, DAT deck, etc.

NOTES:

		AUDIO OUT	L	Y	CR/PR COMPONENT
		DIGTAL			VIDEO OUT
To	VIDEO OUT			jack
		BITSTREAM
		OUT PCM/
					To S-VIDEO OUT jack
					I P
To COAXIAL DIGITAL		COAXIAL	R	VIDEO CB/PB S-VIDEO PROGRE
				OUT	OUT SSIVE
					To S-VIDEO INPUT jack
AUDIO INPUT jack
					or
To COAXIAL DIGITAL					To VIDEO INPUT jack
AUDIO OUT jack

A/V-compatible

or

wide screen TV

[Fig. 7]

•The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by a MD or DAT deck.

•Set DOLBY DIGITAL to PCM for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.(See page 14 to set BITSTREAM for DOLBY DIGITAL.)

Connecting to a Dolby Digital decoder

If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround, the DVD player outputs a Dolby Digital data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can be heard in movie theaters.

Use an audio coaxial digital cables (commercially available) for the audio connections.

Front	Center speaker	Front	To COAXIAL DIGITAL
speaker		speaker
(left)		(right)	AUDIO OUT jack	AUDIO OUT L	Y CR/PR COMPONENT
				DIGTAL	VIDEO OUT
				OUT PCM/	To S-VIDEO OUT jack
				BITSTREAM

	To COAXIAL DIGITAL				I P
Dolby Digital		COAXIAL R	VIDEO CB/PB S-VIDEO PROGRE			To S-VIDEO INPUT jack	A/V-compatible
	AUDIO INPUT jack		OUT	OUT	SSIVE
decoder							or
							wide screen TV
	To VIDEO OUT jack					or

Surround	Surround		To VIDEO INPUT jack
speaker	speaker	Subwoofer	[Fig. 8]
(left)	(right)

NOTES:

•If output Dolby Digital audio, connect to a Dolby Digital decoder, and set DOLBY DIGITAL to BITSTREAM for audio output in the setup mode.

•Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to PCM for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.

Connecting to a TV or a Stereo TV that has Component VIDEO In Jacks

To Right (red) and Left (white)
AUDIO OUT jacks	AUDIO OUT	L	Y	CR/PR COMPONENT
	DIGTAL			VIDEO OUT
	OUT PCM/
	BITSTREAM

			I P
Stereo system	COAXIAL	R VIDEO	CB/PB S-VIDEO PROGRE
		OUT	OUT SSIVE

To Right (red) and Left (white)

ANALOG AUDIO INPUT jacks

NOTES:

To COMPONENT

VIDEO OUT jack

To COMPONENT

VIDEO INPUT jack

A/V-compatible

or wide screen TV

[Fig. 9]

•If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD player, and make sure INTERLACE/PROGRESSIVE SCAN SELECTOR is set to P.

HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS

If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s 75-ohm coaxi- al antenna terminal using a commercially available Stereo Audio/Video RF Modulator. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details.

If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked “ANT IN”), then con- nect the RF modulator to your TV’s antenna terminal as described above.

NOTE

•The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal through an RF Modulator.

– 9 – EN