USING THE FEATURES
Setup
Auto programme
-All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.Press the MENU button and then use ▲/▼button to select
the SETUP menu.
2.Press the ►button and then use ▲/▼button to select Auto programme.
3.Press the ►button to select Auto Search.
4.Press the ►button to begin auto programming.
All receivable stations are stored.
Note :
a. In some models, the station name is stored for stations which broadcast VPS (Video Programme Service), PDC (Programme Delivery Control) or TELETEXT data. If no station name can be assigned to a station, the channel number will be assigned and stored as C (V/UHF
b. In Australia, if no station name can be assigned to a station, the channel number will be
assigned and stored as - - - - - followed by a number see ‘Assigning a station name’ section to assign the station name.
Manual Programme Tuning
-Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number.
1.Press the MENU button and then use ▲/▼ button to select the SETUP menu.
2.Press the ► button and then use ▲/▼ button to select Manual Search.
3.Press the ► button to select Program No. Then select the desired programme number with
the ◄/► button or NUMBER buttons on the Program No. menu.
4.Press the ▼ button to select Audio System. Select a TV system with the ◄/► button;
BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia)
I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
M: SECAM M
5.Press the ▼ button to select Channel Type . Then press the ◄/► button to select V/UHF or Cable as required.
6.Press the▼ button to select Channel No. You can select the desired channel number directly with NUMBER buttons (or using ◄/► button).
7.Press the ▼ button to select Manual Search. Press the ◄/► button to commence searching. If a station is found the search will stop.
8.Press the OK button to store it.
9.To store another station, repeat steps from 3 to 8.
28