USING THE FEATURES
Audio
Stereo / Dual Reception
-When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
On Screen Display
Press the I/II button to set NICAM mode
Broadcast | On screen Display |
Mono | MONO |
Stereo | STEREO |
Dual | DUAL I |
Mono Sound Selection
In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II button twice again.
Language Selection for Dual Language Broadcast
If a programme received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I + II by pressing the I/II button repeatedly.
•DUAL I sends the primary broadcast language to the loudspeakers.
•DUAL II sends the secondary broadcast language to the loudspeakers.
•DUAL I + II sends a separate language to each loudspeaker.
NICAM Reception (option)
•When NICAM mono is received, you can select NICAM MONO or FM MONO.
•When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono.
•When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II, NICAM DUAL I + II, or MONO. When FM mono is selected the display MONO appears on the screen.
Sound output selection
In AV, Component, RGB or HDMI mode, you can select output sound for the left and right loudspeakers.
Repeatedly press the I/II button to select the sound output.
•L+R : Audio signal from audio L input is sent to left
•L+L : Audio signal from audio L input is sent to left and right
•R+R : Audio signal from audio R input is sent to left and right
34