Installation and Operation, cont’d
Front Panel Operation
The control panel (figure
PC 1 | PROJECTOR |
POWER | |
1 | 2 |
PC 2 |
|
1 |
|
VIDEO 1 | VOLUME |
UP | |
1 | 3 |
VIDEO 2 | DOWN |
1 | 3 |
Figure 2-7 — Front panel
1Input select buttons — The PC 1, PC 2, Video 1, and Video 2 buttons select video and audio inputs 1 through 4 on the TPT150 transmitter.
2Projector Power button — The Projector Power button commands the TPT150 transmitter to issue the projector power on or off command. See the TPS150 manual, chapter 4, Serial Communications, to specify the command(s) to be sent.
3Volume Up and Down buttons — The Volume Up and Down buttons command the TPT150 transmitter to increase and decrease the output volume and input level.
Output volume —
Press and release the Volume Up or Down button to increase or decrease the output volume by 1 dB per push of the button or press and hold the button to ramp the output volume up or down.
Input audio level —
1. | Press and hold the desired input select button. |
2. | While you continue to hold the Input Select button, press |
| and release the Volume Up or Down button to increase or |
| decrease the selected input’s volume or press and hold the |
| button to ramp the selected input’s volume up or down. |
3. | Release the input select button. |
CTP150CM Remote Control Panel
AAppendix
Reference Information
Specifications
Parts List