Magnavox MT1905B3, MT1331B3 Hooking UP Your TV ANTENNA/CABLE Connections, Antenna, Smart Help

HOOKING UP YOUR TV (ANTENNA/CABLE CONNECTIONS)

ANTENNA

COMBINATION UHF/VHF

Acombination antenna receives normal broadcast

channels (VHF 2-13 and UHF 14-69). Your connection is easy since there is only one 75Ω (ohm) antenna jack on the back of your TV - and that’s where the antenna goes.

If your antenna has a round connector (75Ω), then you're ready to connect it to the TV. Go to step 2.

If your antenna has flat twin-lead wire (300Ω), you first need to attach the antenna wires to the screws on a 300 to 75Ω adapter (not supplied).

Push the round end of the adapter (or cable) onto the ANT(enna) IN jack on the back of the TV. If the round end of the adapter or cable is threaded, screw it down tight.

SMART

HELP

To set the TV to select only the channel num- bers in your area, see Auto Install (page 4).

300 to 75Ω

Adapter

Combination	Twin-lead
VHF/UHF	Wire
Antenna
(Outdoor or	OR
Indoor)
	Round Cable
	75Ω

ANT.IN

Back of TV

SEPARATE UHF/VHF

You may have two separate antennas. One antenna is

for VHF channels (2-13) and the other antenna is for UHF channels (14-69).

For homes with separate UHF/VHF antennas, you will need an optional combiner before you can connect the antennas to the TV.

Attach the separate UHF and VHF antennas to the correct screws on the combiner (not supplied).

Push the round end of the combiner onto the ANT(enna) IN jack on the back of the TV.

	UHF/VHF
	Combiner
Outdoor UHF Antenna	(not supplied)
(Twin-lead 300Ω)
	Twin-lead
	Wire
	UHF
	300Ω
Outdoor VHF
Antenna	VHF
(Twin-lead 300Ω)

OR

	Ω	ADAPTER
	300
	-
	75
Outdoor VHF	75-300ΩAdapter
Antenna

(Round cable 75Ω)

Round

End

ANT.IN

Back of TV

- 2 -