OPERATION CONTROLS AND FUNCTIONS
The Home Theater Scaler Plus accepts component, PC and HDMI inputs with audio on each. The formats supported by these inputs are as follows:
PC INPUT: | RGBHV | VGA/SVGA/XGA/SXGA/UXGA/WXGA/WSXGA/WUXGA |
|
| VGA@ (60//72/75/85/SVGA @ (56/60/72/75/85) |
|
| XGA @ (60/70/75/85)/SXGA @ (60/75/85)/UXGA @ 60/ |
|
| WXGA @ 60(1280x800)/WSXGA @ 60(1680x1050) |
|
| WUXGA @ 60(1920x1200)/1360x768 |
|
|
|
HDMI INPUT: | Digital | VGA @ (60/72/75/85)/SVGA @ (56/60/72/75/85) |
|
| XGA @ (60/70/75/85) / SXGA @ (60/75/85) / |
|
| UXGA @ 60/WXGA @ (1280x800) |
|
| WSXGA @ 60(1680x1050) |
|
| WUXGA @ 60(1920x1200)/1360x768 |
|
| 480i/p @ 50/60Hz |
|
| 576i/p @ 50Hz |
|
| 720p @ 50/60Hz |
|
| 1080i @ 50/60Hz |
|
| 1080p @ 50//60Hz |
COMPONENT | YPbPr | 480p @ 50/60Hz |
|
| 576 @ 50Hz |
|
| 720p @ 50/60Hz |
|
| 1080i @ 50/60Hz |
|
| 1080p @ 50//60Hz |
| YCbCr | 480i @ 60Hz |
|
| 576i @ 50Hz |
Composite / | YUV / | 480i @ 60Hz |
|
When connecting to a component source (either SD or HD resolution) use a 3RCA to 3RCA cable to connect the YPbPr or YCbCr output of a DVD or Set Top Box to the
When connecting to an DVI source, use an DVI to HDMI cable (or adaptor) to connect the DVI output of a STB or DVD to the HDMI input connector of the Home Theater Scaler Plus.
The Home Theater Scaler Plus can automatically detect the input resolution of all three inputs.
When connecting to a HDMI source, use an HDMl cable to connect the HDMl output of a STB or DVD to the HDMI input connector of the Home Theater Scaler Plus.
The Home Theater Scaler Plus can automatically detect the input resolution of all four inputs.
4