Magnavox MDV460 manual Using the Audio setup menu, Digital Output, All, Pcm, Off

DVD Menu Options (continued)

English

Using the Audio setup menu

APress SETUP on the remote control. The system setup menu appears.

Language	AspectDigital OutputRatio	: :4:3All
	VNightew Mode	:Auto:Off Fit
Video	DownTV SystemSa pling	:NTSC:On
	Video Out	:Component
Audio	Smart Picture	:Personal
Rating
Misc

B Press	to select { Audio }, then
press .
C Press	to select an item, then press

to access.

Example: { Night Mode }

The options for the selected item appears.

If the selection in the menu is greyed out, that means the feature is not available or not possible to change at the current state.

D Use to select a setting and press OK to confirm.

Example: { On }

The setting is selected and setup is complete.

ETo exit, press SETUP.

Digital Output

Select this if you connect to a multichannel decoder/receiver.

A In ‘Audio’, press to select { Digital Output }, then press .

{All }

Select this if the connected device has a built-in multichannel decoder that supports one of the multichannel audio format (Dolby Digital, MPEG-2).

{PCM }

Select this if the connected device is not capable of decoding multichannel audio. The DVD player will convert the Dolby Digital and MPEG-2 multichannel signals to PCM (Pulse Code Modulation).

{Off }

To deactivate the digital audio output. For example, if you use the AUDIO OUT sockets to connect to a TV or stereo system.

B Use to select a setting and press OK to confirm.

Tips:

–If { Digital Output } is set to { All }, all audio settings except MUTE are invalid.

–If { Digital Output } is set to { All } while playback MPEG, MP3/WMA fi les, the player will output PCM signals.

TIPS: The underlined option is the factory default setting.

Press to go back to previous menu item. Press SETUP to exit the menu item.

32

01-43_MDV460_37_eng2.indd 32 2007-01-26 9:52:27 AM