10 Hookups (cont’d)
Connecting the DVD Player to a TV only
TV has AUDIO (red and white) and VIDEO (yellow) IN jacks
Back of TV
(example only)
LEFT AUDIO IN
RIGHT AUDIO IN
VIDEO IN
DVD Player
AUDIO OUT | L | Y | Pr/Cr | COMPONENT |
|
|
|
|
|
| VIDEO OUT |
|
|
|
|
|
| I | P | 3 |
COAXIAL | R | VIDEO |
| |||
|
| OUT |
| OUT |
|
1 | 2 | |
red/white audio cables | ||
| ||
yellow video cable |
|
1 Connect the supplied red and white audio cables to the red and white AUDIO OUT jacks on the DVD Player and to the red and white AUDIO IN jacks on the TV. Match the cable colors to the jack colors. The right jack is red; the left jack is white.
2 Connect the supplied yellow video cable to the VIDEO OUT jack on the DVD Player and to the VIDEO IN jack on the TV.
3 Set the Player’s INTERLACE/PROGRESSIVE SCAN switch to I (interlace).
4 Connect the TV’s power cord to a power outlet.
Turn on the TV and set it to the Audio/Video In channel.
This channel may be labeled A/V or Audio/Video, Aux or Auxiliary, EXT or External, etc. This channel is usually near channel zero, or your TV’s remote control may have a button or switch that lets you select the Video In channel. Or, go to your lowest TV channel (01 or 02) and change channels downward until you find the Video In channel. If you cannot find the Video In channel, check your TV owner’s manual.
5 Connect the DVD Player’s power cord to a power outlet. Press the
You should see the DVD logo on the TV screen. If you do not, check your con- nections and make sure the TV is set to the correct Video In channel.