Magnavox MDV453 owner manual Helpful Hint

Hookups (cont’d) 13

Connecting to a TV and a Stereo

Stereo has red/white AUDIO IN jacks

Stereo

(example only)

LEFT AUDIO IN

RIGHT AUDIO IN

Back of TV

(example only)

yellow video cable

VIDEO IN

DVD Player					2
AUDIO OUT	L	Y	Pr/Cr	COMPONENT
				VIDEO OUT
				I	P
COAXIAL	R	VIDEO	Pb/Cb	S-VIDEOPROGRESSIVE
		OUT		OUT

1

red/white audio cables

1 Connect the supplied red and white audio cables to the Player’s red and white AUDIO OUT jacks and to the Stereo’s red and white AUDIO IN jacks. Match the cable colors to the jack colors. The right jack is red; the left jack is white.

2 Connect the supplied yellow video cable to the Player’s yellow VIDEO OUT jack and to the TV’s VIDEO IN jack.

3 Set the Player’s INTERLACE/PROGRESSIVE SCAN switch to I (interlace).

4 Plug in the Stereo’s power cord. Turn on the Stereo and select the Auxiliary IN station or sound source. See your Stereo owner’s manual for details.

5 Plug in the TV’s power cord. Turn on the TV and set it to the correct Video In channel. This channel may be labeled A/V or Audio/Video, Aux or Auxiliary, EXT or External, etc. This channel is usually near channel zero, or your TV’s remote control may have a button or switch that lets you select the Video In channel. Or, go to your lowest TV channel (01 or 02) and change channels down- ward until you find the Video In channel. If you cannot find the Video In channel, check your TV owner’s manual.

6 Connect the Player’s power cord to a power outlet. Press STANDBY-ON y to turn on the Player. You should see the DVD logo on the TV screen. If not, check your connections and set the TV to the correct Video In channel.

Helpful Hint

•You may use S-Video or Component Video instead. See pages 11-12 for these optional video connections. Remember, you only need one video connec- tion between the TV and the DVD Player.