OPTIONAL SETTING
Camera Angles
BD DVD
Some BD/DVD may contain scenes which have been shot simultaneously from various angles. You can change the camera angle if “ ” appears on the screen.
1During playback, press [ANGLE] repeatedly until ““ appears.
1 / 3
• angles can be varied on the displayed number.
2Use [Cursor K/ L] repeatedly until your desired camera angle appears.
|
|
|
|
|
or |
|
| 2 / 3 |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
3Press [BACK] or [ANGLE] to exit.
or
Virtual Surround
You can enjoy virtual surround on your 2 channel stereo system.
1During playback, press [MODE] repeatedly until “” appears.
Off
2Use [Cursor K/ L] to select the sound level.
|
|
|
|
|
|
|
|
| or |
|
|
| 1 |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Off |
| No surround effect |
1Natural surround effect
2Stronger surround effect
3Press [BACK] to exit.
Note:
•If “Angle Icon” is set to “Off” in “Others” menu, “ ” will not appear. (Refer to page 53.)
PIP (Bounusview) Setting
BD
Some
1During playback, press [PIP].
•primary video
•Secondary video
•PIP information will appear.
2Use [Cursor K/ L] to select the secondary video you want.
•The secondary video will be displayed and the secondary audio will be output.
3Press [BACK] or [PIP] to remove the PIP information.
or
Note:
•Secondary video can also be called up by pressing [MODE].
•The secondary audio will not be output when the secondary audio is set to “Off” or when “BD Audio Mode” is set to “HD Audio Output”. Refer to “Audio Soundtrack” on page 47 and “BD Audio Mode” on page 46.
Note:
•Virtual surround does not function during rapid playback.
•For the virtual surround, audio signal will always be
•Turn down the level or select “Off” if the sound is distorted.
Noise Reduction
DVD
Reduces the noise of the playback picture.
1During playback, press [MODE] repeatedly until “” appears.
|
| Noise Reduction | Off |
|
|
|
|
2Use [Cursor s / B] to select the sound level.
| or | Noise Reduction | 1 |
|
|
| |
Off |
| Shows the original picture as recorded. |
Executes 3D noise reduction which detects and
1deletes the noise by comparing each picture frames.
Executes MPEG noise reduction which reduces
2the block noise and mosquito noise on the subtitle on movie.
3 | Executes both MPEG noise reduction and 3D | |
noise reduction. | ||
|
3Press [BACK] to exit.
Note:
•The setting will remain the same even if the unit is turned to the standby mode.
•You cannot adjust the setting during rapid playback.
48
EN