GoVideo manual DHT7000 Home Theater System

Page 40

DHT7000 Home Theater System

No sound.

Securely connect all audio cables.

 

• Repair or replace any damaged audio or speaker cables.

 

• Press MUTE button on remote control if mute icon is displayed on the TV screen.

 

• The system is in Pause, Slow Motion, Forward/Reverse Scan. Press PLAY on the remote control to return to

 

 

normal playback mode.

 

Check speaker levels.

 

 

 

Severe hum or noise.

Make sure speakers and components are correctly and securely connected.

 

• Make sure connecting cables are away from a transformer or motor, and at least 10 feet away from a TV or

 

 

fluorescent light.

 

• Move your TV away from your audio components.

 

• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

 

Clean the disc.

 

 

 

No stereo sound during VCD/

Refer to VCD/CD audio setup on page 16 and page 30.

CD playback.

Check speaker connections and settings.

 

 

 

No surround effect during play-

Refer to DVD audio setup on page 15 and page 27.

back of Dolby Digital

Check speaker connections and settings.

soundtrack.

• Depending on the DVD, the output signal may not use all 5.1 channels, but rather output monaural or stereo

 

 

sound, even if the soundtrack is recorded in Dolby Digital format.

 

 

 

Cannot tune in radio stations.

Make sure antennas are securely connected. Adjust the antennas and connect an external antenna if necessary.

 

• The signal strength of the stations is too weak (when tuning in with automatic tuning). Use manual tuning.

 

• No stations have been preset or the preset stations have been cleared. Preset the stations.

 

 

 

Remote does not function.

Remove any obstacles between the remote and the system.

 

• Move closer to the system when operating the remote.

 

• Point the remote directly at the sensor on front panel of the system.

 

Replace the batteries.

 

 

 

Disc does not play.

Make sure there is a disc in the tray.

 

• Turn the disc over. Make sure the playback side is facing down on the disc tray.

 

• The disc is skewed or warped.

 

• The region code on the DVD does not match the system.

 

• Moisture has condensed inside the system. Remove the disc and leave the system turned on for about half an

 

 

hour.

 

 

 

Disc does not start playing

Program Play or Repeat Play is selected. Press CLEAR to cancel these functions before playing a disc.

from the beginning.

Resume Play is active. Press STOP twice and then restart DVD playback.

 

 

 

34

Image 40
Contents Page Insert Batteries Unpack Your DVD SystemCopyright/Trademarks Table of Contents Basic Operations Advanced Features Index Welcome ChapterCompatible Discs Remote Control System OverviewPage Front Panel Controls Front Panel Display Rear Panel Connect TV Connecting the SystemPlace Speakers Connect Speakers Connect AM Loop AntennaConnect FM Wire Antenna Connect External Audio/Video Components OptionalPower on the System About Standby ModeSetup Menu Categories Setup Menu OverviewSetup Menu Navigation OSD Menu Language Language SetupSubtitle Language Audio Language Disc Menu LanguageAudio Setup Video SetupTV Aspect Dolby Digital Setting DTS SettingMP3 Setting CD/VCD SettingMore Audio Setup Pro Logic SettingSpeaker Setting Rating SetupSetting the Password & Rating Level Speaker Setup Adjusting Speaker Balance/LevelsDHT7000 Home Theater System Basic Disc Playback First Things FirstPlaying a DVD, CD or VCD Disc Menu Navigation Additional Disc Playback OptionsPresetting Radio Stations Basic Tuner OperationAdjusting Bass/Treble Adjusting Stereo/MonoListening to the Radio Display Special Playback FeaturesGo To Angle TitleZoom Subtitle AudioRepeat Enhance Video Setting Program PlaybackVCD Playback Playing VCDsSound ButtonMP3 Playback DHT7000 Home Theater System Customer Service Information TroubleshootingFrequently Asked Questions DHT7000 Home Theater System Technical Specifications Amplifier SectionVideo Section Warranty Who Provides the Limited WarrantySafety Important Safety InstructionsHelp DHT7000 Home Theater System Safety/Regulatory Information Tective HousingOn handling discs Index PCM 15, 16 Setup Menu Tree

DHT7000 specifications

The GoVideo DHT7000 is an innovative and versatile home theater receiver designed to enhance the audio and visual experience in any living space. This receiver is packed with state-of-the-art features and technologies that cater to both audiophiles and home theater enthusiasts.

One of the standout features of the DHT7000 is its support for high-definition audio formats. It offers compatibility with Dolby Atmos, DTS:X, and other immersive sound technologies, providing a three-dimensional sound experience that draws listeners into the action. This capability is complemented by its multi-channel amplification system that delivers pristine audio quality across multiple speakers, transforming standard stereo audio into a full surround sound experience.

Equipped with advanced connectivity options, the DHT7000 ensures seamless integration with modern devices. It supports HDMI 2.1, which allows for 8K video pass-through, enabling users to enjoy higher resolutions with minimal lag. Additionally, it features multiple HDMI inputs, making it easy to connect gaming consoles, Blu-ray players, and other entertainment devices. The inclusion of Bluetooth and Wi-Fi connectivity allows users to stream music directly from their smartphones or tablets, enhancing the versatility of this receiver.

The DHT7000 also takes pride in its user-friendly interface, with an intuitive remote control and an easy-to-navigate onboard menu system. This simplicity allows even those unfamiliar with audio equipment to set up and customize their home theater system easily. Moreover, the receiver comes with automatic room calibration technology. This feature intelligently adjusts the audio output based on the room's acoustics, ensuring the best sound quality regardless of the listening environment.

In terms of design, the GoVideo DHT7000 boasts a sleek and modern aesthetic, featuring a compact footprint that can fit into various entertainment setups. The build quality reflects durability while also ensuring efficient heat dissipation, which prolongs the lifespan of the receiver.

Another notable characteristic of the DHT7000 is its energy efficiency. The device complies with energy-saving standards, making it an environmentally friendly choice for those looking to reduce their carbon footprint.

In summary, the GoVideo DHT7000 is a feature-rich home theater receiver that combines high-definition audio support, versatile connectivity, user-friendly operation, and an attractive design. With its advanced technologies, it stands out as a top choice for anyone looking to elevate their home entertainment experience.