Magnavox 50ML8105D/17 owner manual PIP/PBP Menu

Channel Setup

Setup

Exit

Back

Parental Control

Sound Source

PIP/PBP

PIP Size

Size

PIP Position

Sound

Mode

Main Menu

Picture

Using the OSD menus

PIP/PBP Menu

The PIP/PBP menu provides various options for the PIP and PBP modes. The PIP mode helps you to watch

one program on the full screen, and another program on a smaller pop-up window, which can be posi- tioned in any of the four corners of the screen. The PBP function

divides the viewing area into two halves, allowing the simultaneous viewing of two programs in win-

dows placed side by side. Refer to

the following table to learn about the various menu items:

Single PIP PBP

Small Medium Large

Main Sub

English

Component	Function	Range / Options
Mode	Enables single, PIP, or PBP mode.	Single, PIP, PBP
PIP Position	Sets the position of the PIP window in one of	Top left, Top right, Bottom right,
	the four corners of the screen.	Bottom left
PIP Size	Selects the size of the PIP window	Small, Medium, Large
Sound Source	Selects the sound source to be outputted	Main, Sub
	through the speakers.

Refer to the following tables for PIP/PBP combinations:

Main	Sub window	Sub window	Main
Component	S-Video	Component	S-Video
VGA	Composite	VGA	Composite
DTV	ATV	DTV	ATV
HDMI		HDMI

For instance, if the main window displays the Component input signal, you can select the S-video, Composite, or ATV inputs as the sub window.Similarly, if the main signal is the Composite input, the sub window can display the Component, VGA, DTV, or HDMI inputs.

Notes

•You can also use the PIP/PBP, PIP SIZE, ACTIVE, SWAP, and POSITION buttons on the remote control to activate and control the PIP or PBP mode. See page 4.

•Use the SWAP button to switch programs between the main and secondary windows in PIP/PBP mode.

23