| Troubleshooting |
Problem | Item to check |
|
|
No power | • Check that the power cord is properly connected. |
| • Make sure the wall power outlet is working. |
| • Make sure the remote has batteries. |
| • If the remote control and control panel do not work, ensure that the |
| power switch on the rear of the TV is set to ON. |
|
|
Remote control not working | • Replace the batteries |
| • Check that the batteries are inserted correctly |
| • Check that the remote control is close enough to the display |
| • Adjust the angle between the remote control and the display. |
|
|
Picture is fuzzy | • Check that the device generating the picture signal is operating prop- |
| erly. |
| • Check that you have set the display to receive the proper signal source. |
|
|
No sound | • Check to see if the Mute function is activated. |
| • Check the volume level. |
| • Check that the device generating the audio signal is properly connected |
| to the display. |
|
|
Picture is unstable | • Check that your video card is set within the allowable range. |
|
|
Screen is blank | • Contact the dealer where you purchased the display. |
|
|
A buzzing sound comes from | • Check that the socket of the grounded hole is good. |
the speakers during display. |
|
|
|
No image. | • Check that the signal source is connected to the correct terminal. |
|
|
Temperature LED is red | • Turn off the TV set and allow it to cool down. If the LED still persists, |
| contact the nearest service center. |
|
|
Poor picture quality | • Try switching to another channel and see if the problem persists. |
| • Adjust the antenna. |
| • Check all cable connections. |
|
|
Picture rolls vertically | • Adjust the antenna. |
| • Check all cable connections. |
| • If you are using a VCR, check the tracking. |
|
|
Lamp indicator LED red | • Lamp failed. Contact your nearest service center. |
|
|
There is a switch on the TV | • Default is on. |
|
|
Other | • Contact the dealer, authorized service personnel, or the Magnavox help |
| number provided here: |
|
|
32