Magnavox MWD200GA owner manual Display Setting, Display menu, Audio Setting

B DISPLAY Setting

You can change the display functions. Follow steps 1 to 2 on page 14.

•Select “4:3 LETTER BOX”, so that black bars may appear on the top and bottom of the screen.

•Select “4:3 PAN & SCAN” for a full height picture with both sides adjusted.

•Select “16:9 WIDE” if a wide screen TV is connected to this unit.

5To exit the menu

SETUP

Hint

STILL MODE:

•Select “AUTO” usually.

•If you select “AUTO”, automatically select the best resolution setting (FRAME or FIELD) based on the data characteristics of the pictures. (default).

•If you select “FIELD”, the picture in the still mode will be stabilized.

•If you select “FRAME”, the picture in the still mode will be highly defined.

•An individual picture on the TV screen is called a “frame”, which consists of two separate images called a “field”.

•Some pictures may be blurred if you select “AUTO” in the still mode due to their data characteristics.

Set to “ON” when outputting in 48kHz.

Set to “OFF” when outputting the original sound.

DOLBY DIGITAL: (Default: BITSTREAM)

Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.

•BITSTREAM: Outputs a Dolby Digital Signals.

•PCM: Convert the Dolby Digital into PCM (2 channel).

5To exit the menu

SETUP

Hint

DRC:

•This function is available only on the discs which are recorded in the Dolby Digital format.

DOWN SAMPLING:

•When playing disc with copyright protection, the sound will be down sampled at 48kHz, even if you set to “OFF”.